The KX2-2046 is an X-band high-power MMIC amplifier fabricated on the GaN-on-SiC process. It operates from 8.0 – 10.5 GHz and typically provides 20W saturated output power with power-added efficiency of 46%. The KX2-2046 can support military and commercial radar systems. It is matched to 50Ω with integrated DC blocking capacitors on both RF input and output ports. The KX2-2046 is 100% DC and RF tested on-wafer. It is available in chip form. **Key Features** - Frequency Range: 8.0-11.5GHz - Small Signal Gain: 26dB - High Pout: 20W - High PAE: 46% - DC bias: Vd=28V @Idq=0.3A - Pulsed Vg: PW=100µs, DC=10% - Chip size: 2.95x1.66x0.1mm  

The Haigh-Farr Wraparound™is a self-contained, omnidirectional antenna for cylindrical or conical shaped vehicles. A single point feed is used and no external splitters, combiners or cable harnesses are required for installation. The antenna may be mounted flush, or on the exterior of the vehicle.

Various line up, high torque frameless motor capable of precise speed and position control. Application areas are Collaborative robots, Dog Horse robots.

FRAZIER AVIATION develops customized short- and long-term program packages that fit our Customers individual sustainment requirements and budget limitations. We are committed to crafting tailored spares and repair solutions that meet the distinct demands of each client. Military Aviation Program Sustainment (MAPS) * Tailored Customer agreements * Consisting of high turn structures * Manufactured at economies of scale * Cost effective, value added * Just-In-Time (JIT) deliveries Frazier Aviation Sustaining the Warfighter

[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

ALTERNATIVES TO: MS25271 / MS25395 / MS25267 / MS25269 / MS25273 / MS27418

The Haigh-Farr family of rugged Blade antennas is available in frequencies ranging from UHF to upper C-band. Since 1972, our blade antennas have a demonstrated reliability of use in high-performance airborne applications. In addition, they are used extensively in ground-based vehicles such as race cars, trucks, tanks, and motorcycles, to name a few. 60XX & 61XX Series: Our 60XX & 61XX Series blade antennas have quasi-uniform null-free hemispherical gain patterns and may be provided in either straight or rounded blade configurations. 60XX and 61XX Series blade antennas are available in standard and high powered versions. With sufficient airflow, our standard blades handle an average power of 25 - 30W CW and our High Powered blades can handle an average power of 80W CW. These blade antennas share a common footprint with varying height. Multiband: Haigh-Farr Multiband blade antennas utilize identical materials and construction as our 60XX & 61XX series blade antennas with additional bandwidth. UHF: Haigh-Farr UHF blade antennas provide coverage down to 380 MHz and up to 470 MHz in two unique form factors. Our 6300-X series of blade antennas utilize identical materials and construction as our 60XX & 61XX series blade antennas in the larger blade structure required at UHF-band. Our P/N’s 16230-XXX and 16400-XXX are low profile, mechanically robust designs that can be custom tuned to meet discrete UHF frequencies, with an option to add thermal protection for high temperature environments.

The Ophir® SupIR 80-1200mm MWIR f/5.5 and SupIR 60-1200mm MWIR f/4 lenses are designed for 15 µm 640x512 and SXGA 10 µm pitch FPA (focal plan arrays) cooled MWIR detectors, respectively, providing detection ranges exceeding 28 km. Key Features: - High performance IR continuous zoom lens - Compatibility with 10 µm SXGA/HD and 15 µm 640x512 cameras - Maintains accurate LOS & focus through the full zoom range - Designed for extended range observation & C-UAS systems - Detection range exceeds 26 km