The SCXMC-SFPDP is a high-speed optical communication card that operates through the XMC interface of the SBC. It is designed to transmit and receive large volumes of data between the SBC and other devices in real time. Unlike Ethernet, which can be difficult to synchronize, the SCXMC-SFPDP uses optical communication with synchronization signals, enabling precise and high-speed data transfer. It offers low response latency (<40 µs) and supports four transmit/receive channels at 3.125 Gbps per channel. A device driver program is required for operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system to ensure reliable real-time data transmission between mission-critical subsystems.

Dim. : 2"W High strength type 13 webbing 2 rows of 1/2" MOLLE webbing Removable antimicrobial/FR treated spacer mesh pad 2" Cobra® buckle Vertical pull test 6,800 lbs +/-5% Loop/hook selectable at the inner Velcro Composition Material : 500D Cordura® + ARAMID / PV® Size : SMALL 32" - 35.5" MEDIUM 34.5" - 38" LARGE 38" - 41.5" Color : MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

- Long life and precise movement control through fine-tuning - Shaft diameter 5mm~ - Accuracy G3~G7 - Shaft length differs depending on material, size, accuracy of shaft - Efficiency 85% or higher

HF Kit is a fully integrated high-frequency (HF) communications package built around the proven Rolatube mast technology and the PTS Raven sloping wire antenna. Designed to meet the demands of tactical, emergency, and field-based operations, this system enables long-range HF communications in a compact, lightweight format. The core of the kit is Rolatube’s 5m composite mast—made from a patented rollable material that provides excellent rigidity when deployed but can be rolled into a compact form for transport. This mast supports the deployment of the Raven antenna, a versatile and field-tested solution for HF communication, ensuring coverage across a wide range of frequencies. Whether used by military units, first responders, or remote industrial teams, the System 75: 5m HF Kit offers plug-and-play simplicity, quick setup, and reliable signal performance in the most demanding environments. Its portability and ease of use make it an ideal choice for teams requiring effective HF capability without the burden of traditional bulky infrastructure.

High productivity • The nodding head type spindle maximizes productivity and efficiency during multi-face and 5-axis simultaneous machining operations. High rigidity • Dual ball screws deliver improved stability and responsiveness for heavy-duty cutting. Easy chip disposal • The machines’ central chip removal system improves operational efficiencies.

EMCORE’s IPADS-I (International) provides significant enhancements for today’s Army and Marine Corps survey teams. IPADS offers a proven, reliable, lightweight, off-the-shelf solution developed around four main components. > Compact Position/Navigation Unit (CPNU) > Control and Display Unit (CDU) > Battery and Charger Unit (BCU) > Porro Prism Assembly (PPA) All components are housed in a robust frame that allows for easy component access and stability, while facilitating a ready, two-person transfer between vehicles and aircraft. Features High-precision common survey enables efficient mass fires Impervious to jamming (inertial mode) Embedded Selective Availability Anti-Spoofing Module (SAASM) GPS option Navigation aids (compass rose and digital maps) In-vehicle and offset survey Combat-proven Embedded Built-In Test (BIT) High reliability MTBF, low mean time to repair (MTTR) No periodic calibration required Applications Artillery Survey to Mark: Survey Control Point (SCP) position; used to initialize weapon systems Orienting Line (OL) position and azimuth; used to initialize and align artillery assets

Designed with durability in mind, the SG20BL is equipped with a robust M8 circular connector, hardened steel gears and an impressive IP-68 rating, ensuring it can withstand harsh environmental conditions while maintaining optimal performance. With a Mean To Time Failure (MTTF) of greater than 1,000 hours, users can trust our servo to deliver consistent functionality throughout its operational lifespan. Available in both a 12V and 24V model with wide operating voltages of 9-15V and 18-32V, respectively, the SG20BL also features an ultra-efficient brushless motor delivering exceptional power-to-weight ratio and a contactless magnetic encoder offering enhanced responsiveness. The implementation of CAN 2.0A,B / DroneCAN command protocols further streamlines communication and integration with advanced unmanned systems. #UAV #UAS #UGV #UUV #USV