The static-dynamic mixer vipro-DUOMIX is perfectly suited for compressible, two-component materials – with very different viscosities, extreme mixing ratios and high-pressure sensitivity. The extended version with optimized mixing blocks for low-viscosity, and high-viscosity materials on either side brings a further advantage: It is ideally suited for materials that are difficult to mix – with different or identical viscosities. A modular design with five different dispenser sizes per side allows complete flexibility. And a wide range of mixing ratios from 1:1 to 100:1. The vipro-DUOMIX can be used for complex two-component applications in diverse industries such as automotive manufacturing, aerospace, or electronics. Irrelevant of whether it is for a dot dispensing, a bead application or for a potting application. Particularly in the production of aircrafts the static-dynamic mixer is used for honeycomb potting or for edge sealing. Special nozzles with adjustable bead width are available for this purpose. A wide range of two-component materials based on e.g., polyether, epoxy resin, silicone or polyurethane can be dispensed in all areas of application. Due to the parallel alignment of the dispensers, and due to a weight-optimized design, the vipro-DUOMIX is very compact – ideal for assembly in robotic cells or for automated applications.

In an uncertain world, L3Harris is anticipating and rapidly responding to challenges with agile technology - creating a safer and more secure future.

The KX2-2046 is an X-band high-power MMIC amplifier fabricated on the GaN-on-SiC process. It operates from 8.0 – 10.5 GHz and typically provides 20W saturated output power with power-added efficiency of 46%. The KX2-2046 can support military and commercial radar systems. It is matched to 50Ω with integrated DC blocking capacitors on both RF input and output ports. The KX2-2046 is 100% DC and RF tested on-wafer. It is available in chip form. **Key Features** - Frequency Range: 8.0-11.5GHz - Small Signal Gain: 26dB - High Pout: 20W - High PAE: 46% - DC bias: Vd=28V @Idq=0.3A - Pulsed Vg: PW=100µs, DC=10% - Chip size: 2.95x1.66x0.1mm  

The FORCE2C is a rugged 3U VPX flight-certifiable mission computer featuring a QorIQ T2081, full avionics I/O, safety certification artifacts (DO-254/178C up to DAL A), and FACE compatibility. • QorIQ T2081 (1.8 GHz, 4 cores), SBC314C SBC: 4 GB DDR3L, 16 GB SSD, PCIe Gen 2 ×4 • Avionics I/O: ARINC 429 (8 TX, 10 RX), MIL-STD-1553 (4), discrete I/O, serial (RS-422), GbE, USB, RS-232/422 • Rugged conduction-cooled build; MIL-STD / DO-160 rated; −40 °C to +71 °C • DO-254/DO-178C certification artifacts available (DAL D to A) • FAA certified (SOI complete), FACE compliant

An indigenous combat system to be installed on the next-generation Korean Destroyer (KDDX), developed as a localized alternative to the Aegis Combat System. It is a fully integrated software and hardware suite that controls all assets—including power systems, sensors, and weapons—to conduct naval operations. - Compliant with MIL-SPEC standards (shock, vibration, temperature/humidity, EMI/EMC) - Incorporates connector assemblies to enhance maintainability

SAF-FIRES™ is a standards-based, image generator agnostic, and scalable Call-For-Fire and Close Air Support training simulation with autonomous Smart Trainer suitable for deployment in Joint Fires and accreditable JTAC training simulators. Built upon the same Call-For-Fire and Close Air Support software engine that powers the accredited simulation Fires FST™, SAF-FIRESTM delivers the same mature and complete Joint Fires training solution but makes it available for integration with any DIS, HLA or CIGI compatible simulation or Image Generator. Supporting both conventional near-peer and counter-insurgency operational scenarios, SAF-FIRES™ enables JFOs and JTACs to train realistically in a modern complex battlespace against an agile and adaptive adversary. Heightened realism and cognitively challenging training are enabled through the incorporation of non-combatants, urban clutter, UAV surveillance, various close air support platforms and accurate military targeting procedures.

Engine modules for Rolls-Royce (Allison) Model 250 gas turbine engine series. Maintenance, repair, overhaul, rentals, exchanges, sales and service.

The 100W High Power Amplifier is an L-band amplifier that delivers 100W output across two channels with a 60% duty cycle. It offers a gain of over 50 dB, with output flatness of 2 dB depending on the input signal level. The amplifier provides an ACLR performance of -20 dBc at maximum output. Equipped with an output-stage bandpass filter (BPF), it achieves excellent harmonic suppression of -70 dBc. Built-in monitoring functions include output signal and temperature monitoring.