Lock Ring & Braid & Backshell

ABC designs and develops many components or functions to best meet the requirements of the needs in the special functions required in the test facilities. Essentially, these are hydraulic components that cover all types of fluids from very low pressure to very high pressure in a very wide scope of flow ranges.

MPS Microsystems offers a complete range of high precision ball screws for positioning less than 5 µm. Mostly custom-made, these screws ensure smooth and uniform movement resulting from the high precision of their thread, achieved by grinding. Our ball screws are made exclusively of stainless steel and are fitted with double nuts to allow fine adjustment of the axial play. Moreover, an optional ogival thread can provide a higher static and dynamic load capacity. Thanks to a large number of options, we can ensure that the ball screw meets your technical and quality needs. The following parameters can be personalized: lubricant (grease, oil, dry lubrication, no lubrication), customized screw ends, shape and external dimensions of the nut and screw, multiple nuts on the same screw, left-hand thread, thread length, specific axial play, special surface treatment, and more.

Slim, ergonomic full coverage vest Perfect fit for women 360 degree soft armor protection Taktic buckle system for quick connect & release Antibacterial/FR treated padded spacer mesh system Poly mesh cummerbund for increased ventilation Flush admin chest pocket with internal elastic straps PALS webbing for MOLLE attachment Zipper for MV Assaulter's Zip-On Back Panels Increased structural integrity and reduced rear deformation Compatible with our entire accessories line Soft armor included Composition Material : 500D Cordura® + ARAMID / PV® Size : Small : 8.5" x 11.5" Plate Pocket Medium : 9.3" x 12.3" Plate Pocket Large : 10" x 13" Plate Pocket XLarge : 10.9" x 13.8" Plate Pocket Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

Engine accessories for Model 250 Rolls-Royce (Allison) gas turbine engines. Bleed Valves, Fuel Controls, Fuel Nozzles, Fuel Pumps, Governors & more.

AI Navigation Algorithm Certus features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS Certus contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Dual Antenna RTK GNSS Certus contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi-Protocol Support Certus features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.

Linden Photonics cables ensure stability and reliability even in extreme environments. With patented LCP jacket, non-kink design, maximum continuous length of 50 km, and crush-resistant durability, Linden Photonics provides high-performance cables optimized for deep-sea and aerospace applications.

The AI Inspection Rover is capable of autonomous driving indoors and outdoors, obstacle avoidance, high-resolution image acquisition, aircraft underbody inspection, and platooning. Its low-height design allows it to pass under the aircraft, and with its zero-turn function, it can execute missions more efficiently. Additionally, it can drive slopes of up to 10° and overcome bumps of up to 30mm.