The ECL4000 is an LTE outdoor base station developed for the U.S. CBRS market, providing a service radius of several kilometers and enabling seamless private LTE network service.

Key Features Revolutionary speed enabled by advanced LFD technology High-resolution and highly accurate prints Compatible with a wide range of resins including functional and engineering materials Dimensions: 390 × 367 × 554 mm Build Volume: 200 × 125 × 210 mm Weight: 18.3 kg Specifications XY Resolution: 25μm Minimum Layer Thickness: 25μm Maximum Print Speed: 100 mm/hr

Shell : Silicone Rubber(Black) solderless terminal : KS D 5202, C5210R1/2H Rope : Nylon code(Black) Terminal : STS304(Black)

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

The ACTUS® CORE-3 Mini Dot Sight provides rapid target acquisition with unlimited eye relief and a precisely aligned aiming point projected onto a collimated lens. Constructed from a fully sealed 7075-T6 aluminum housing, it offers exceptional durability, enabling reliable performance in even the harshest environments. Its premium lens coating ensures superior light transmission and minimal distortion, delivering crystal-clear accuracy across a wide range of conditions.

Supply of engine hydraulic tools for naval vessels and submarines Fuel nozzle tester, hydraulic pump & hose, hydraulic jack Supply of hydraulic pumps for the driver's seat of Hyundai Rotem armored vehicles

Confronting climate change, designing quieter and more efficient airplanes, developing innovative satellites to observe the Earth's system: our sector is using its skills to their utmost to take action for the environment. Our two main objectives are to advance our technologies so that we can better observe our planet and to create sustainable air travel.

· Optimized deployment of manned and unmanned aerial assets with separate takeoff and landing runways · Securing aerial/maritime superiority with unmanned combat aerial vehicles (UCAVs) and Drone · Expanded real-time surveillance range through the operation of medium-altitude unmanned reconnaissance aerial vehicles · Enhanced assault capabilities to target and command & control (C2) with manned and unmanned forces