The EL2000 is an LTE femtocell developed for indoor use, providing seamless LTE service in environments such as homes or offices.

Based on the KN series MIL-DTL-55302 compliant connectors an ESA version of the KNB/KNC connectors has been created, which also offers signal contacts designed for demanding defense, commercial aerospace and space applications. They also are available in the 2 and 3 row series and offer flexibility not available with other interconnects.

The static-dynamic mixer vipro-DUOMIX is perfectly suited for compressible, two-component materials – with very different viscosities, extreme mixing ratios and high-pressure sensitivity. The extended version with optimized mixing blocks for low-viscosity, and high-viscosity materials on either side brings a further advantage: It is ideally suited for materials that are difficult to mix – with different or identical viscosities. A modular design with five different dispenser sizes per side allows complete flexibility. And a wide range of mixing ratios from 1:1 to 100:1. The vipro-DUOMIX can be used for complex two-component applications in diverse industries such as automotive manufacturing, aerospace, or electronics. Irrelevant of whether it is for a dot dispensing, a bead application or for a potting application. Particularly in the production of aircrafts the static-dynamic mixer is used for honeycomb potting or for edge sealing. Special nozzles with adjustable bead width are available for this purpose. A wide range of two-component materials based on e.g., polyether, epoxy resin, silicone or polyurethane can be dispensed in all areas of application. Due to the parallel alignment of the dispensers, and due to a weight-optimized design, the vipro-DUOMIX is very compact – ideal for assembly in robotic cells or for automated applications.

Electric motor used to drive the joint (ST axis) of the Explosive Ordnance Disposal (EOD) Robot.

- To measure RCS for the aircrafts, warships, helicopters, chaff and etc. - Verify to meet pre-defined RCS specifications on design phase.

R HUGHES' Ca-Zoom PTZ 140 is a Pan-Tilt Zoom Camera inspection equipment equipped with the Ca-Zoom® 6.2 system. This equipment is capable of a total of 432x zoom with 36x optical zoom and 12x digital zoom, increasing inspection efficiency. In addition, two high-performance 35W lights are installed in the light source to enable more smooth inspection. The inspection technology of the PTZ Camera Ca-Zoom® line of products makes them ideal for inspecting large areas that are difficult for humans to access, such as tanks, vessels, pipelines or nuclear power plants.

HPH series is a high density interconnect available up to 303 contacts with multiple hardware choices and backpotting option.With a 0.6mm contact diameter, the HPH Series comes in 3-6 row configurations and is available up to 303 signal contacts on a 1.901mm staggered grid. Contacts are removable for ease of maintenance.

With durable constructions, GORE-FLIGHT Microwave Assemblies provide reliable performance for critical aircraft systems. To improve signal integrity and reduce interference, they incorporate shielding that meets and even exceeds the 90 dB requirement. A consistent impedance of 50 ± 1 ohms ensures a lower insertion loss and more reliable VSWR than leading competitors, both before and after installation. GORE-FLIGHT Microwave Assemblies also deliver the following benefits: Durability for the Life of the System Cost-Saving Performance