Chelton’s tuneable and conformal antennas provide a unique capability by combining advanced adaptability with seamless platform integration. Designed to optimise signal coverage across diverse environments, they enable reliable, high-performance connectivity for mission-critical operations. Their low-profile, aerodynamic design reduces drag and weight, while the tuneable technology ensures maximum flexibility across frequencies and operational needs. This combination of innovation and engineering expertise allows Chelton to deliver tailored solutions that outperform conventional antenna designs, supporting customers in achieving dependable communication even in the most challenging and dynamic conditions.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

- 1 axis Fiber Optic Gyroscope - Bias Repeatability (over temp. range): ≤ 1.0º /hr (1σ, RMS) - Angle Random Walk: 0.035º /√hr (typical, 1σ) - Power Consumption: 1.3 W @ 25℃ (<2.4 W, @ -40℃) - Input Voltage: + 5 V - Weight: 165 g (0.36 lbs)

The first step toward armed helicopters The Bomb Rack Unit (BRU) is a device installed on a helicopter’s Stub-wing to mount various armaments such as rocket launchers and air-to-ground missiles, and it consists of a Pylon Unit and a Bomb Rack Unit. CTLA’s Bomb Rack Unit is equipped with a Boresight function that allows vertical (up/down) and horizontal (left/right) angle adjustments, and a solenoid-actuated free-fall weapon release (Jettison) method is applied. CTLA’s Bomb Rack Unit has passed the system tests for the Light Armed Helicopter (LAH) and received suitability certification, and it is currently in mass production.

Fast & precise 5-axis exceeds expectations • 15000, 20000 r/min high speed spindle • B-axis/C-axis 0.0001 degree control as standard • Tool change time (C-T-C) 3.8s, 28% faster than previous model • Increased X/Y/Z-axis rapid traverse speed & acc./dec. • Cooling functions as std. on spindle, motor/LM guide/ball screw (X/Y/Z), C-axis table motor • Integrated thermal compensation systems for spindle and structure FURTHER INCREASED MACHINING CAPACITY • Ø630mm dia. 2-axis tilting table, 26% increased compared to previous model • Max. Ø600 x H500mm machining area, 32% increased compared to previous model • Max. 400kg table load capacity with stable table support structure • X/Y/Z axis travel distance 650/520/480mm, up to 20% increased compared to previous model EASY ACCESS, EASIER OPERATION • Easy setup of workpieces with 580mm distance between operator and table center • Easy tool exchange by placing the tool magazine door on the front and applying a tool removal device (Auto Kicking Device) • Improved chip disposal capability with enhanced coolant flood & flushing functions • Grease lubrication system • Compact integrated automation system (AWC)

PELICAN-D JT is a MWIR detector for missile applications. The FPA is InSb based, having digital Readout Integrated Circuit (ROIC) in a format of 640 x 512 with 15μm pitch. Pelican-D JT has a unique structure of Dewar which enables very fast cool down time and hence quick mission readiness using Joule-Thomson (JT) cooler. Due to the low heat load on the focal plane, the detector achieves long mission duration. The Detector can be supplied with a proximity board which provides Camera Link interface to the customer system. This highly simplifies the integration of the detector to the system.

Seedcore’s VPX Chassis Housing Assembly is designed as a structural platform for Multi-function radar signal processing systems. Featuring a robust 8U 2×5 slot VPX configuration, precision-machined aluminum construction, and excellent thermal management, it ensures high mechanical stability and optimal heat dissipation in demanding defense environments. This chassis housing is deployed in Korea’s key air defense radar systems, including the L-SAM, M-SAM, and LAMD programs, supporting mission-critical radar signal processing architectures.

Description