The SC-SBCRTM, a Seedcore Co., Ltd representative product, is a backplane transmission module that performs the I/O function of the SBC627. When the SBC627 board is plugged into the motherboard(Backplane) in front of the Chassis, you can extend the I/O function of the board by plugging the SC-SBCRTM board into the back of the Backplane.

Konan LLM is a Large Language Model independently developed by Konan Technology. Excelling over DeepSeek-R1 in eight categories such as writing, roleplay, reasoning, and coding, Konan LLM ENT-11 unifies generative and reasoning modes for more refined and flexible performance.

A VGA (640×480) LWIR (8–12 µm) uncooled micro-bolometer module with 12 µm pixel pitch and NETD ≤ 50 mK, paired with an F1.0, 10.7 mm EFL lens delivering H42° / V31.5° / D52.5° FOV. It streams at 30 Hz in either UVC (USB-C, 5 V) or GMSL1 (FAKRA, 12 V), with power consumption < 1.9 W. The compact, lightweight housing (30×30×58.9 mm for UVC; 30×30×70.9 mm with FAKRA for GMSL1; IP65; −40 °C to 85 °C) makes it well-suited for autonomous vehicles, UAVs, and security systems, providing reliable day/night thermal perception of pedestrians, animals, and objects in adverse weather.

Miniaturization model for UAVs Minimized Vibration & Noise by our technique Provide an electronic board Customized item for Military's needs

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

Rolatube Tripods are purpose-built for applications where mobility, speed, and performance matter. Constructed from Rolatube’s patented rollable composite material, each tripod offers a durable yet lightweight structure that rolls or folds down for easy transport and storage. Designed to support a range of payloads and mission profiles, the lineup includes the highly portable System 30, versatile Industrial Compact Tripod, and robust System 50 Tripod MIL for demanding field operations. These tripods are engineered for rapid deployment and compatible with Rolatube masts or other payloads requiring stable elevation. Their corrosion-resistant build, compact footprint, and tool-free setup make them ideal for communication, surveillance, and sensor support across defence, emergency response, and industrial sectors.

From the rocket launcher to its upper assembly, the bomb rack unit, completing a full weapon system as one set. The rocket launcher is a weapon system independently designed to launch guided missiles or rockets through 7-tube and 19-tube launchers, enabling both single and multiple firings. Through its development, independence of the weapon system has been secured, and structural stability has been achieved by applying a design that considers aircraft vibration and aerodynamic effects. In addition, it is equipped with the capability to receive the system’s firing signal and ignite the rocket. Based on the successful development in 2017 of the 7-tube 2.75-inch rocket launcher assembly for helicopters, the company is now independently developing upgraded versions of the 7-tube and 19-tube rocket launcher assemblies. Through this effort, we are securing scalability for application to next-generation helicopters and UAV systems.

Our MDB1200WP industrial actuator offers a contactless magnetic encoder, brushless motor and IP67-certified water & dust-proof protection, making it suitable for many demanding industrial applications. This 30mm powerhouse delivers over 1500 oz-inches of torque at 7.4V and features an aluminum alloy case to dissipate heat, two ball bearings and five hardened steel gears, and PWM control protocol. Program numerous parameters to optimize the installation and performance for your industrial applications. #UAV #UAS #UGV #UUV #USV