High density, lightweight signal connector specifically designed for applications where space and weight is at a premium for board to board interconnections. The HDLP series meets the requirement of space-constrained applications that require low mating force, a high number of mating cycles, low and stable contact resistance, and excellent fretting corrosion resistance.

Tescan AMBER integrates BrightBeam™ field-free SEM optics with the Orage™ Ga⁺ FIB and fully automated lamella workflows. Designed for versatility, it supports inverted and planar sample prep, nanoprototyping, and gentle final polishing across a wide range of material types.

SeaHFlight is an advanced 2D/3D GIS-based command and control solution engineered for the comprehensive management of low-altitude aircraft, including helicopters, drones, and future UAMs. It provides a complete operational picture, offering full lifecycle management from initial flight planning and real-time monitoring to post-flight performance analysis. Key Capabilities: Unified Situational Awareness: Achieve superior decision-making with a dynamic 2D/3D operational map that visualizes all air assets in real-time. The system integrates crucial data layers, including weather, airspace information, and flight plans. End-to-End Mission Management: Streamline the entire operational workflow, covering everything from flight plan creation and pilot hour management to flight history recording and detailed performance evaluation. Proven Interoperability: SeaHFlight is designed for seamless data integration with key national and military agencies (Army, Police, National Fire Agency, Forest Service). This creates a unified network for complex, multi-agency public safety or defense operations. Future-Ready Platform: Built to manage not only current helicopter and drone fleets but also the next generation of Urban Air Mobility (UAM), SeaHFlight is a scalable, long-term solution for modern aviation.

CI Systems사의 는 I-레벨 광학 테스트 및 실험실 테스트를 수행하는 데 이상적인 장비입니다. 소형이기 때문에 휴대 가능하며, 컴퓨터화되어있어 차량에 설치할 수 있습니다. 열화상 장비 및 가시광 센서에 대한 종합적인 테스트를 현장에서 할 수 있어 D-레벨 시설 없이도 테스트를 효율적으로 수행할 수 있습니다. 콜리메이터, 방사선원(블랙바디, 가시광 광원), 타깃 휠(수동 또는 전동)로 구성되며, CI Systems의 CTE 소프트웨어와 연동 시 간편하고 객관적이며 반복성을 극대화한 테스트가 가능합니다. 환경 변화에도 높은 정확도를 유지하며, 환경 챔버 테스트, 생산 라인 테스트, 현장 테스트 등 다양한 환경에서 활용할 수 있습니다. The CI Systems ILET (Intermediate-Level Electro-Optical Tester) family of test systems is ideally suited for performing I-level optical tests and laboratory testing. Portable, compact and computerized, ILET testers can be installed on a vehicle, bringing comprehensive testing of thermal imagers and visible light sensors to the field, reducing the need of D-Level facilities. The basic ILET configuration includes a collimator, a radiation source (blackbody and/or visible light source) and a target wheel (manual or motorized). The ILET is easy to use when interfaced with CI Systems’ CTE software (optional), minimizing testing turnaround time and maximizing testing objectivity and repeatability. The testers retain their accuracy over a wide range of ambient temperatures. Thanks to the ILET’s outstanding features and versatility, it is useful in a variety of applications such as testing in environmental chambers, testing on production lines and testing in the field..

The QRS116 is a compact angular rate sensor ideally suited for applications in tactical, aerospace and mission-critical instrumentation. The QRS116 features exceptionally low noise, fast start-up, and a simple electrical interface, the QRS116 has no moving parts ensuring long service life and high MTBF. System Performance PARAMETERS SPECIFICATIONS Standard Ranges ±100°/sec Input Voltage + 5 Vdc ±5% regulation Short Term Bias Stability (100 sec at const. temp) 3 deg/hr Output Noise ( DC to 100 Hz) ≤ 0.002°/√Hz* * Values Indicated are for ±100°/sec. Range Features Exceptional Bias Stability Unprecedented Low Angle Random Walk Values Superior Vibration Performance Compact Industry-Standard Package (Same as QRS11) Rugged, Compact Package Integrates easily Applications Tank Turret Stabilization Defense Fixed Wing Defense Helicopter Unmanned Aerial Vehicles UGV – Unmanned Ground Vehicle Platform Stabilization Camera Stabilization Antenna Stabilization ROV – Remotely Operated Vehicle

It is a system that performs missions such as monitoring, surveillance and reconnaissance by ejecting and launching a foldable fixed-wing drone from the canister(tube) launcher. It is equipped with EO/IR Cameras (Electro-Optical / Infra-Red), which are mission equipment for reconnaissance, so that effective day and night image information can be collected. The gathered image information is transmitted to the ground control system (GCS) in real time while detecting and tracking the target by applying AI-based image processing technology. The foldable fixed-wing UAV has a simple structure and light weight, so it can be stored and transported in the canister launcher, and can be operated immediately so that it can be operated without time delay, and if necessary, the air vehicle can be retrieved and re-used by using a net-type recovery system.

Removable shoulder & waist straps can be adjusted to fit the end-user without removing the rack Attaching to select tactical plate carriers with the QASM buckle system or using stand-alone with H Harness Small, medium 4-way stretch Tweave general purpose pouch (Qty.1) Magazine pouches for 5.56mm or 7.62mm mags (Qty. 4) 9mm pistol magazine pouches (Qty. 2) Compatibility : PICO-DSX, PICO-DS, PICO-MBAV, EPIC-FED Composition Material : 500D Cordura® + ARAMID / PV® Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

The LSH rack and panel high power connector series from Smiths Interconnect is utilized across many different market segments including aerospace, automotive, industrial, test and measurement, and mass transit. The foundation upon which the LSH is built is the leading-edge Hypertac® hyperboloid contact technology. This world class interconnect technology ensures LSH connectors are immune to shock, vibration and fretting. In addition, they feature low insertion and extraction forces that are a catalyst for easy mating relative to their contact size. The LSH Series delivers customers a contact life that can be maintained for up to 100,000 mating cycles and at an extremely low cost of ownership.