Collects data from various sensors within the aircraft system, converts it into the required format, and transmits it to the mission computer or flight control computer. Converts control commands received from the mission computer or flight control computer and relays them to sensors and other peripheral devices. Supports system control functions, monitors the status of key systems, and provides feedback. Achieves 70% cost competitiveness compared to equivalent-performance products. - x2 MIL-STD-1553B - x2 UART (RS-422/485) - x24 Analog input interfaces - x8 Analog output interfaces - x64 Discrete input interfaces - x40 Discrete output interfaces - Size : 270 x 270 x 62.2mm - Weight : 2.5Kg - Power : MIL-STD-704F (28VDC, 10W) - Environment : MIL-STD-810G - EMI/EMC : MIL-STD-461G

1. 용도 : 차량의 엔진동력을 이용하여 요구하는 전력을 생성하는 장치 2. 기능 : 정격출력 10kW, 3상 140V~560V 생성 3. 관련 장비/체계 분야 : 30밀리 자주대공포(비호복합), 단거리지대공무기(천마) 4. 관심 협업 분야 / 목표시장(국가) - 전차ㆍ장갑차 그 밖의 전투기동장비 / 국내 방위산업시장 및 해외 (미국, 멕시코, 프랑스, 이스라엘, 인도네시아, 말레이시아, 아랍에미리트, 유엔국 등) 5. 기타사항 - 영구자석 기반 발전기 기술 및 고효율 에너지변환 기술(특허보유) - 국방규격화 완료, 해외수출 경쟁력 제품

The engine offers a take-off power of up to 180 kW (235 hp). Excellent power-to-weight ratio. Small installation dimensions. Two outpu shaft speed configurations. Stable operation at high and low temperatures.

The AMT-206-1 composite tail rotor blade is a direct replacement for Bell 206A and 206B series helicopter tail rotor blades. Now fitted with a new style of feathering bearings manufactured by KAMATICS. These bearings provide a longer life expectancy, with a patented lining that provides lighter pedal loads and a higher level of chemical resistance, compared to that of the standard fabric Teflon-lined bearings. The AMT-206-1 tail rotor blade has a non-symmetrical airfoil section and incorporates a swept tip. The T/R Blade is primarily fabricated from uni-directional Graphite (carbon fiber) and Aramid (Kevlar™) continuous fibers suspended in an epoxy matrix and is fitted with a nickel abrasion strip on the leading edge. The abrasion strip is bonded on using a urethane adhesive. The AMT-206-1 composite tail rotor blades have a 30% cost advantage, twice the lifespan, higher strength and thrust, and a substantial noise reduction, making them safer and ideal for helicopter operators flying in noise-sensitive areas like national parks and built-up areas.

Three hydration ports Two side sleeve Internal hydration bladder pocket PALS webbing for MOLLE attachment Removable shoulder straps Drag handle Removable internal storage zipper pocket Removable beavertail Antimicrobial/FR treated padded spacer mesh Cubic Liters : 10.49L Dim. : 16" H x 8" W x 5" D Composition Material : 500D Cordura® + ARAMID / PV® Color : MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

Our product forms include strip, sheet, plate, bar, forging stock, wire,welding products, fittings, pipe and tubing.

The Cardinal 1280 is a high-definition SWIR InGaAs detector featuring a 10μm pixel pitch. This detector offers high resolution and sensitivity, enabling EO/IR systems to capitalize on the SWIR spectrum for low-light imaging and extremely long-range daytime surveillance, even in challenging weather conditions like smoke, dust, fog, or rain. It incorporates SCD's advanced Asynchronous Laser Pulse Detection (ALPD) technology. A Thermo Electric Cooler (TEC) is included for optimal performance of the Focal Plane Array (FPA) in low light level scenarios. SCD is committed to standing alongside our customers, ensuring they receive the finest solutions available.

A distributed sensor system based on BOTDA (Brillouin Optical Time Domain Analyzer), capable of detecting structural deformation and external intrusion.