EFFECTIVE RANGE : 600 m RIFLING : 1:7" Twist, 6 Groove R/H MAGAZINE CAPACITY : 30 rounds

High Density: With a pin spacing of 0.050 inches, it's ideal for lightweight and compact equipment. Environmental Resistance: Ensures stable performance in harsh environments, including vibration, shock, extreme temperatures, and moisture. Variety: Available in various forms, including solder cup, wire-attach, PCB-mount, and cylindrical.

For UAVs requiring both high-accuracy positioning and robust communication, Harxon’s compact, multifunctional helix antennas, such as the HX-CUX005A and HX-CUX618A, provide an integrated solution. Combining GNSS, WiFi, and Bluetooth antennas, these models deliver centimeter-level positioning alongside reliable data transmission across 2.4GHz, 5.8GHz, and 7.2GHz bands. The advanced inter-system design ensures exceptional signal clarity by effectively minimizing mutual interference, making them ideal for demanding UAV applications.

The mmWave 5G small cell provides ultra-broadband service in the n257 (28GHz) band, delivering higher data capacity than n79 (4.7GHz) small cells. It supports NSA mode via EN-DC or NR-DC with LTE and 5G NR Sub-6GHz base stations, and can also operate in SA mode as a standalone mmWave service.

The nose wheel assembly refers to the complete integrated unit consisting of the wheel, tire, axle, bearings, and associated structural components. In some configurations, it also includes steering mechanisms, shock absorbers (oleo strut), and braking systems (for specific aircraft types). The assembly is engineered for durability, precision, and reliability, enabling the aircraft to safely absorb impact forces during landing and provide accurate steering during taxiing.

Temperature Calibrated Pressure Sensors The Air Data Unit features very high accuracy absolute and differential pressure sensors. These are factory calibrated over a wide temperature range to further increase measurement accuracy and provide the best air data possible through varying conditions. Power Up Self-Calibration On top of factory temperature calibration, every time the air data unit powers up, it performs a self excitation calibration to adjust for small deviations of bias and scaling error. This allows the system to compensate for calibration aging and means that it never needs to be returned to the factory for recalibration. Reliability The Air Data Unit is built on top of a safety oriented real time operating system and all software is designed and tested to safety standards with fault tolerance. Its communication interface is optically isolated and the hardware is designed and tested to MIL spec.

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

Primarily used in medium-sized and large satellites, it provides high torque performance and momentum conservation. By localizing the Control Moment Gyro controller, which had previously been imported for Korea’s domestic satellite industry, Lumir has gained a competitive advantage in both performance and cost.