SNT Motiv created the 'K Series', the strongest infantry firearm boasting the highest accuracy and destructive power, through pure independent technology development, and is fulfilling its mission of national security as the first line of independent national defense.

The lightest plate carrier of 1.95 lbs Taktic buckle system for quick connect & release Antibacterial/FR treated padded spacer mesh system Poly mesh cummerbund for increased ventilation Flush admin chest pocket with internal elastic straps Rear internal pocket for storage Elastic webbing straps for cable management PALS webbing for MOLLE attachment Removable front flap Zipper for DS Assaulter's Zip-On Back Panels QASM buckle System Plate pocket incorporated 4-way stretch to accommodate multiple plate thickness Composition Material : 500D Cordura® + ARAMID / PV® Size : Small : 8.5" x 11.5" Plate Pocket Medium : 9.3" x 12.3" Plate Pocket Large : 10" x 13" Plate Pocket XLarge : 10.9" x 13.8" Plate Pocket Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

[LEO GNSS-R] Satellite : LEO RF Characteristics : GPS L1/L5, Galileo E1/E5a(option) Accuracy : Position ≤ 10m(3DRMS), Velocity : ≤ 1m/s Raw Data Accuracy : Pseudo-Range : 1m(RMS) Carrier-Phase : 10mm(RMS) Data Output Rate : 1Hz 1PPS Accuracy : Sync to GPS Time Data < 1us (1PPS Accuracy < 1.5us) TTFF : Cold Start ≤ 20min / Warm Start ≤ 10min Dara Interface : MIL-STD-1553B, RS-422(Data Interface) [GEO GNSS-R] Satellite : GEO RF Characteristics : GPS L1/L2C/L5, Galileo E1 Accuracy : Position :: ≤ 30m(3DRMS), Velocity : ≤ 1m/s Raw Data Accuracy : Pseudo-Range : 1m(RMS) Carrier-Phase : 10mm(RMS) Data Output Rate : 1Hz 1PPS Accuracy : 2us(RMS)/Sync to GPS Time Data TTFF : Cold Start ≤ 45min / Warm Start ≤ 20min Dara Interface : MIL-STD-1553B EEE Parts : ITAR Free Parts

< Frequency Range > ● LB-400: 400 ~ 460MHz ● LB-900: 800~928MHz ● MB-1500: 1300~1500MHz ● MB-2400: 2400 ~ 2500MHz ● HB-5.2: 5150 ~ 5250MHz ● HB-5.8: 5725 ~ 5875MHz < TX path output Power (at antenna port) > ● Normal mode: 35dBm [min] ● On each antenna port 2x 35dBm ● Interference mode: 40dBm [min] < TX path maximum Input Power > ● +20 dBm < RX path Gain > ● 25dB typ. < RX path Noise figure > ● Low bands: 3dB max. ● High bands 3.5dB max. < RX path IIP3 > ● -10dBm typ. < RX IP1dB compression point > ● 15dBm typ. < Power Supply > ● +24V ± 1 Vdc

· Optimized deployment of manned and unmanned aerial assets with separate takeoff and landing runways · Securing aerial/maritime superiority with unmanned combat aerial vehicles (UCAVs) and Drone · Expanded real-time surveillance range through the operation of medium-altitude unmanned reconnaissance aerial vehicles · Enhanced assault capabilities to target and command & control (C2) with manned and unmanned forces

Global Wideband Connectivity for Mission Success Honeywell’s JetWave MCX satellite communications system delivers the world’s most advanced high-speed SATCOM capabilities needed for the most demanding mission profiles. It enables global in-flight broadband data connectivity on nearly any Ka-band network – including Inmarsat’s Global Xpress (GX) network, Wideband Global SATCOM (WGS), and other commercial and military Ka-band networks – making it truly network-agnostic for the most extensive global coverage. Built on proven, high-speed JetWave technology, JetWave MCX utilizes a wider frequency band (29-31 GHz Tx and 19.2-21.2 GHz Rx), offering access to commercial and military Ka-bands globally. And the dual polarity configuration provides increased bandwidth in high-traffic areas while meeting high-data uplink requirements that military and government operators require. JetWave MCX is designed with “future-proofing” in mind, exceeding current connectivity requirements while enabling expanded customer connectivity needs in the future. For the unique requirements of military and government operators, JetWave MCX can enable a wide variety of mission-critical applications, such as en-route mission communications, real-time weather, in-flight video conferencing, large file transfer, in-flight mission planning and briefings, ISR video transmission, and secure communications. We offer specialized data packages for ISR missions, making use of the increased upload speed capabilities. Single-IP address network-switching capabilities enable seamless connectivity for users globally, while access to resilient modem waveforms offers additional security and jam-resistance in hostile environments. JetWave MCX’s high-bandwidth capabilities can transform the aircraft into an “airborne communications node” by receiving data simultaneously from multiple sources – such as UAVs or ground forces – then processing and amalgamating the data for airborne Command and Control or for transmission to ground control. No matter the mission profile, JetWave MCX offers the resiliency, bandwidth, and network-agnostic capabilities needed to enable mission success.

CoaXPress enables bidirectional transmission of data transfer, camera control, power supply (PoCXP), and triggering over a single coaxial cable. This product supports the following transmission standards. Designation Bit Rate ========== ======== CXP-1 1.250 Gbps CXP-2 2.500 Gbps CXP-3 3.125 Gbps CXP-5 5.000 Gbps CXP-6 6.250 Gbps CXP-12 12.500 Gbps The CXR-4C amplifies and transmits image signals from 1/2/4-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.  4 CH x 1 Camera Configuration  2 CH x 2 Camera Configuration  1 CH x 4 Camera Configuration  2 CH + 1CH Camera Configuration

Side shells, wing shells and fuselage structures are made of CFK, GFK, aluminium or organic sheets and get connected during production. Sealants are used to seal the connection surfaces. These are usually two-component polysulphides, which have to be applied in different geometries. Typical applications are: Fillet sealings, oversealings, interface sealings and seal caps. Due to their properties, polysulfides require very low pressure and shear handling. The compressibility of the fillers contained in the medium requires a high level of expertise and a coherent overall system from material removal to application. With manual application, long production times and high material ejection have a negative influence on the complete process. Complex quality standards are required due to the risk of human error. With the in-house developments of the vipro-DUOMIX from ViscoTec, this process can be depicted fully automatically. The individual nozzle design is also adapted to each application. The result is a controlled dosage in compliance with the specifications and at the same time the highest repeat accuracy.