It is a product produced in Korea and has high performance when used in EO/IR Gimbal for small drones. It can view both VIS and IR images simultaneously and is coupled to a small drone with a small weight to perform operations. Products with manufactured and domestic IR sensors in Korea. we deliver superior technologies that shape the future of defense. Whether supporting ISR missions or enhancing precision in loitering munition operations, MS60 products are designed to ensure operational excellence in the most challenging environments.

< Frequency Range > ● LB-400: 400 ~ 460MHz ● LB-900: 800~928MHz ● MB-1500: 1300~1500MHz ● MB-2400: 2400 ~ 2500MHz ● HB-5.2: 5150 ~ 5250MHz ● HB-5.8: 5725 ~ 5875MHz < TX path output Power (at antenna port) > ● Normal mode: 35dBm [min] ● On each antenna port 2x 35dBm ● Interference mode: 40dBm [min] < TX path maximum Input Power > ● +20 dBm < RX path Gain > ● 25dB typ. < RX path Noise figure > ● Low bands: 3dB max. ● High bands 3.5dB max. < RX path IIP3 > ● -10dBm typ. < RX IP1dB compression point > ● 15dBm typ. < Power Supply > ● +24V ± 1 Vdc

This rocket nozzle featuring conformal cooling channels and isogrid ribbing was manufactured using EOS Copper CuCP, a pure copper material optimized for additive manufacturing. The production required approximately 72 hours, taking advantage of the exceptional thermal and electrical conductivity of pure copper to meet demanding aerospace performance requirements. As one of the few companies in Korea capable of performing metal additive manufacturing with pure copper, we provide advanced technical expertise and support OEM production as well as collaborative technology development projects with various industrial partners. The showcased component was designed by nTopology and demonstrates the synergy of advanced design optimization with state-of-the-art copper additive manufacturing.

Long-Endurance VTOL Aircraft with an Aerodynamic Design for Maximized Energy Efficiency. Equipped with Communication Systems and EO/IR Surveillance Cameras, it can fly up to 3 Hours of Mission Operation. Comes with a EO/IR Camera as Standard, and can be customized to carry payloads such as a Surveying LiDAR or Camera (≤1kg) based on customer requirements. Application : Take off/Landing on Moving Vessels, Aerial Surveying, Reconnaissance, Payload Drop (Grenade, Cargo, etc.)

The ENM2000 is a vehicle-mounted mmWave base station integrating CU/DU/RU, working in conjunction with the EPNR4000, 5G Core, and application server. It enables ultra-broadband data communication that Sub-6GHz base stations cannot provide.

- 1 axis Fiber Optic Gyroscope - Bias Repeatability (over temp. range): ≤ 1.0º /hr (1σ, RMS) - Angle Random Walk: 0.035º /√hr (typical, 1σ) - Power Consumption: 1.3 W @ 25℃ (<2.4 W, @ -40℃) - Input Voltage: + 5 V - Weight: 165 g (0.36 lbs)

SNT Motiv created the 'K Series', the strongest infantry firearm boasting the highest accuracy and destructive power, through pure independent technology development, and is fulfilling its mission of national security as the first line of independent national defense.

Today, space satellites are moving away from RF Analog based payloads providing low speed telecommunication signaling, to a new Digital Transparent Processor architecture for high throughput satellites. Those architectures increase the demand for rugged and higher speed connectivity. To meet those industry needs, Smiths Interconnect has developed the NXS Series, an advanced high speed, high density interconnect to provide next generation data on demand. Equipped with the Hypertac® hyperboloid contact technology the NXS system can withstand data rate application up to 50 Gbps (per channel) requirements, including extreme levels of vibration, shock and climatic testing above 2100 g. The NXS Series is designed in a robust construction with 4 or 12 high speed quadrax (dual-twinax) modules. The recent EMI Flange addition provides the extra benefit of reducing electromagnetic interference. Each ultra-high density quadrax module contains 2 dual twinax at 100 Ω each pair. It is blind mateable, hot pluggable, with ultra-low mating forces and low outgassing materials. In addition, the solderless PCB mount design reduces the customer’s risk and cost of ownership. The connector is mounted after reflow and has no impact on nearby components.