STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

An indigenous combat system to be installed on the next-generation Korean Destroyer (KDDX), developed as a localized alternative to the Aegis Combat System. It is a fully integrated software and hardware suite that controls all assets—including power systems, sensors, and weapons—to conduct naval operations. - Compliant with MIL-SPEC standards (shock, vibration, temperature/humidity, EMI/EMC) - Incorporates connector assemblies to enhance maintainability

A compact EO/IR gimbal camera system designed for UAVs, unmanned surface vehicles, and defense platforms. The system integrates a QVGA/VGA-class LWIR thermal imager and a high-resolution EO camera within a stabilized gimbal, ensuring reliable performance in diverse environmental conditions. Optimized for ISR (Intelligence, Surveillance, Reconnaissance) missions, the system provides detection, recognition, and identification (DRI) capabilities with low-SWaP (Size, Weight, and Power) characteristics.

This system product is a product that directly supplies and heats lubricant oil for smooth operation of the main engine cylinder’s metallic and mechanical movement. Lubricator, a product that supplies lubrication directly to the main engine cylinder liner, can control injection timing and consumption using an electronic control method that responds to the movement of the main engine piston. The alpha lubricator system is based on an algorithm controlling the cylinder oil dosage proportionally to the sulphur content in the fuel and, fuel consumption on particular load of engine. Minimum cylinder oil dosage is required to provide an adequate oil film and detergency properties. Everllence and WIN GD engines are currently applying the second generation Lubricator type, the Everllence type is Mk-I and the WIN GD type is Mk-ε (Epsilon).

High-Reliability Space-grade SRAM memory : 1. Density : 16Mbit (512k x 32bit) SRAM 2. Package Type : 100 Pin CQFP (Ceramic Quad Flat Package) 3. MIL-PRF-38535 Class V Qualified 4. Operating Temperature : -40℃ ~ +125℃ 5. Radiation : TID > 102 krad, SEL LETth > 80.4MeVcm2/mg@ 85℃

We are one of the world's leading manufacturers of both military and commercial aircraft ground support equipment. Hydraulics International, Inc. is proud to be one of a few small companies having the total self sufficiency in the design and fabrication of aerospace ground support equipment.

REP series is easy to use for quick mating. The REP panel and cable connectors are a highly cost-effective interconnect system, which solves the constant need for simple and reliable connector solutions in rail applications. A full plastic solution offered in either wire attachment or PCB mounting options to provide rapid assembly installation without requiring additional mounting hardware. Cable receptacle connectors are available to mate with the cable plug connectors for cable-to- cable solutions when needed. The series is qualified to French and European rail standards. The connectors are available as one overmolded plastic part to save assembly time.

Securing borders, hunting drugs, finding threats. Shield AI’s V-BAT is the future of next-generation UAS. The most tactical, most logistically simple UAS in the world. There’s nothing else like it.

V-BAT Crushes The Competition

01 Results
In head-to-head customer fly-offs, V-BAT wins. The U.S. and allied militaries are choosing V-BAT because it delivers, period.

02 Performance
Ducted-fan technology enables industry leading max-takeoff weight to payload weight ratio. We didn’t just break the record, we redefined what’s possible.

03 Safety
No exposed rotors, no required operator safety zones. So safe you can get hands on during takeoff and landing.

Maritime UAS of Choice

V-BAT beat out 13 competitors to win the Navy and SOCOM MTUAS Increment 2 Program of Record. Its unique design and controls allow it to take off & land in high winds, on crowded flight decks, aboard moving vessels with landing zones as small as 12’ x 12’.