AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. L1/L5 Multi Constellation RTK GNSS The Certus Mini N supports L1/L5 dual frequencies, and GPS, GLONASS, Galileo, BeiDou and NavIC constellations. Access to multiple constellations and frequencies provides enhanced accuracy, availability and performance even in difficult environments such as multi-storey urban canyons. The GNSS receiver has 10 mm position accuracy with real-time RTK or post-processed PPK. Extensive Interoperability Certus Mini seamlessly communicates with a wide range of industry standard protocols including NMEA 0183 and CANOpen making it easy to integrate into existing systems. Certus Mini effortlessly interfaces with ROS 1, ROS 2, and Ardupilot, streamlining your development processes for maximum efficiency and effectiveness.

It is a hybrid-powered(Engine + Generator) multicopter system that significantly overcomes the limitations of short flight times typically associated with battery-powered drones. It can carry up to 10 kg of mission equipment and perform operations for up to 2 hours, with the capability to autonomously land on moving vehicles and naval vessels. Its versatility is further enhanced through the development of various mission equipment, making it suitable for multipurpose applications.

Poongsan has been producing a variety of copper and copper alloy plates, ranging from copper products for everyday life to high-tech industrial materials. These copper and copper alloy plates, which are recognized as high-quality materials at home and abroad, are representative industrial basic materials that are widely used in all industrial fields, including automobiles, electrical and electronics, semiconductors, communications, construction, and machinery. Poongsan has various casting facilities, including the world's largest shaft furnace, a hot mill capable of continuously rolling 6-ton slabs, a tandem mill, and a 20-stage cold rolling mill, as well as various hot and cold rolling facilities and heat treatment furnaces. We are building a large-scale integrated production system from the casting process to finishing processes such as cutting and packaging. Poongsan's rolled products are produced in various sizes depending on the type, ranging from 630mm in width, 0.03mm in thickness, and thickness tolerance to 2/1000mm. These products have accurate specifications and physical properties and a smooth surface thanks to the establishment of a thorough quality control system using cutting-edge inspection equipment. Excellent. Poongsan's copper and copper alloy rolled products are produced in a variety of ways, including pure copper, brass, phosphor bronze, nickel silver, cupronickel, and special alloy (PMC26 and other) depending on the alloy composition and casting method. In particular, in response to market demands for new high-strength copper alloys due to technological advancements such as the Internet of Things and electric vehicles, we have developed new alloys (P1000HS and others) and are applying them to high-tech products requested by customers.

Digital mission engineering tools connect every stage of the engineering product lifecycle, from initial design to operation. They enable reality-based 3D simulation across multi-domain environments such as air, space, land, and sea by incorporating high-resolution terrain, satellite orbits, RF and radar systems, and sensor environments to accurately replicate real mission conditions. With accurate dynamics-based physical models at the core, these tools provide quantitative analysis of relative positioning between systems, changes in altitude and attitude, line-of-sight availability, and communication link status. Users can predict and evaluate mission elements such as sensor operations, communication links, platform maneuvers, and orbit optimization through scenario-based simulations.

The Monitor meets the military environmental specifications. COTS technology's design, manufacturing and technical support is committed to continuously providing a total solution to your display needs. The Monitor uses a full array of LED backlights which employ a local dimming technology for precise picture control and smooth motion for a more natural picture.

• Arinc connectors • Modular connectors • D-sub / Rectangular connectors • Terminal blocks • Quick junction modules

ㅇKey Features -Provide communication Interface of at least 100Mbps -Ensuring a fixed bandwidth of communication processors and providing a deterministic communication environment by utilizing Virtual Link(VL) and BAG method -Provide SNMP, UDP, TCP, ICMP protocols ㅇQuality and Certification - DO - 178B DAL A - MIL-STD-810G - MIL-STD-461F

SkyNaute™ hybrid inertial/GNSS navigation system meets all the safety and reliability requirements for airplanes, helicopters and drones. Thanks to the HRG Crystal™, SkyNaute™ is the most competitive aeronautical navigation system on the market. The best in safe performance SkyNaute™ Inertial Navigation System relies on mature and proven technologies such as HRG Crystal™ Hemispherical Resonator Gyroscopes. Combining high performance and integrity in all circumstances, SkyNaute™ shows exceptional physical features compared to competing INS with similar performance.