The era of ultramodern aviation is here. The clean-sheet Gulfstream G500™ unites performance and comfort with revolutionary technology.

Outfitted with high-thrust engines and an aerodynamic new wing, the G500 is built for effortless takeoffs and landings. Enjoy access to short runways and high-altitude airports, coupled with increases in efficiency and reductions in emissions.

The long-range G500 gives you back time with a high-speed cruise of Mach 0.90. Fewer flight hours means longer periods between scheduled maintenance visits, higher potential aircraft value and fresher crews.

The tall and wide G500 cabin offers great flexibility, including the option of a forward or an aft galley and an aft stateroom lit by four panoramic oval windows. You can stroll down a generous aisle or recline in all-new seats. Tables seat three across for meals or meetings.

Currently in the final stages of development. Compact engine of a simple design and small frontal diameter, fuel lubricated, equipped with a BLDC starter-generator. Excellent thrust-to-weight ratio. Pyro ignition (optional).

Raytheon Intelligence & Space's ISTAR is a multi-intelligence aircraft that uses artificial intelligence, integrated onboard sensors and advanced processing to provide critical information to military and civilian air and ground crews. Our integrated suite of ISR solutions provide state-of-the-art capabilities for national defense missions.

[Infrastructure long products] For the cutting of high-performance materials and titanium alloys, the Service Center Switzerland has 9 powerful circular and band saw machines for precise cuts up to a diameter of 350 mm. BIBUS METALS AG has had experience in cutting special grades since the company was founded in 1979. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Deburring of bar blanks - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Chamfering and pointing of bars [Infrastructure flat products] The BIBUS METALS Group has machining facilities at several locations in order to implement professional processing of customer requirements. We use specialist sheet/plate shears for high-performance materials and titanium alloys up to a sheet thickness of 12 mm. In addition, the group has one of the largest fully automatic plate saws in Europe. The Behringer type LPS 25-125-6A saw can cut titanium plates up to a size of 2000 x 6000 mm and a thickness of 150 mm according to the customer's requirements. Waterjet cutting is carried out with our own machines or in cooperation with selected partner companies. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Shearing up to 12 mm thick - Sawn for panels up to 150 mm thickness with tolerances of -0/+3 mm - Circles/rings or any shapes according to drawings will be water jet cut or precision water jet cut

R&S®M3SR은 민간, 방위, 해상 지-공-지 통신 솔루션을 위한 최신 고정식 무전기를 대표하는 기기입니다. 로데슈바르즈는 점차 엄격해지는 통신 요구사항에 대해 수년 간의 실무 경험을 기반으로 한 기술 개념으로 대응하고 있습니다. 무전기는 가장 엄격한 품질 측면을 충족하여 최대 RF 성능을 제공합니다. 이 고성능 소프트웨어 정의 무전기는 전 세계 보안 당국과 정부 조직에서 높은 평가를 받고 있습니다.

Investigate the smallest of features with spatial resolution down to 600 nm – A state-of-the-art nano-focus x-ray source, precision stages, and high-quality detectors work together to deliver sub-micron resolution imaging. Perform true 4D imaging with Dynamic CT – High temporal resolution, continuous and uninterrupted scanning, and specialized 4D software tools bring synchrotron-like capabilities to the lab. Implement 3D in situ experiments – continuous sample rotation and scanning enable uninterrupted in situ experiments. Dedicated “no-cable-wrap” interfaces simplify experiment set-up. Accommodate a broad range of samples – UniTOM HR’s high power source (50W), multiple detector options (up to 3) and heavy load stage (45 kg) accommodates samples up to 500 mm diameter X 700 mm high. Maximize system utilization and throughput – A fast frame rate detector and a high flux x-ray source combine for high temporal resolution tomography giving you the ability to scan more samples and accommodate more users.

The KF-21 is the project which aims to replae the aged fighters in operation, F-4, and F-5 of the Republic of Korea Air Force and develop the indigenous Korean fighter aircraft which is equipped with performances suitable for the future battlefield of the country's air force. Korea's largest-scaled KF-21 project is the national R&D project with a development span of 10 years and 6 months and is driven with Indonesia under international joint development. Based on its development experience and infrastructure of a homegrown airplane, such as the KT-1 basic trainer, T-50 Advanced Jet Trainer, TA-50 Lead-in-Fighter-Trainer, and FA-50 Light Combat Aircraft, KAI is under development of the KF-21 project successfully. Through this project, KAI plans to develop the aerospace technology of Korea and contribute to national peace and security as well as economic development.

The personal pocket-sized ISR capability allows imediate situational awareness for soldiers executing dismounted operations globally. The system provides real-time live motion video back to the operator and the opportunity to take snapshots during missions.