5Ton Bulletproof Vehicle is developed independently and provides rapid movement and reinforced life protection for infantry units. This vehicle can be utilized as a transporter or a massive supply convoy. It was developed with concepts of toughness and grandiosity that can forestall the enemy force, practical design of a diagonal structure which improves bullet proof performance, and a cap over type cabin that enhances maintainability.

This miniaturized system allows, depending on the desired configuration, to move very precisely between 1 and 3 sets of lenses over a stroke of several centimeters. The design has been optimized to ensure perfect alignment of the lenses and to minimize their tilt throughout the movement. This optomechanical system mainly consists of high-precision standard MPS and FAULHABER modules, such as brushless or stepper motors, ground ball screws with double nuts and linear ball bearings. It is particularly recommended for focusing a laser over a long distance, for example for the guidance of unmanned flying objects or for communication between flying objects. The number of lens sets, lens size and stroke can be configured at will.

Receives vibration signals from an accelerometer installed on the aircraft engine and monitors engine vibration. Processes real-time vibration signals and converts them into IPS AVG units for output. Developed for localization, achieving 50% cost competitiveness compared to equivalent products. - x1 MIL-STD-1553B - x2 UART(RS-422/485) - x2 Accelerometer sensor - Sample rate : Up to 5,000Hz - Size : 220 x 206 x 52 (mm) - Weight : 1.75Kg - Environment : MIL-STD-810G - EMI/EMC : MIL-STD-461G - Power : MIL-STD-704F (28VDC, 10W)

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m  In cases where a single PC cannot handle large amounts of image data, it becomes necessary to duplicate the image and use multiple PCs for processing. A splitter is required in such scenarios.  The CLS-30T2S amplifies and transmits image signals from a single camera to up to two PCs, supporting Base/Medium/Full configurations (10 Taps supported).  The Master side transmits RS232 and CC1~4 signals, while the Slave side replicates and transmits image signals only.

Smiths Interconnect is the world leader in spring contact probe design. EZiCoax is a single-piece, spring-loaded compression mount Coax for high-speed signaling between two PCBs. Designed for high performance in the harshest conditions, EZiCoax offers a fully compliant, highly reliable connection with lower cost of ownership.

The VPX power supplies are compliant with VITA 62, MIL-STD-704, MIL-STD-461 and MIL-STD-810 for 28 Vin DC, 270 Vin DC & Universal AC systems. The VPX delivers up to 1000 W and up to 6 outputs with a typical efficiency of 91%. Offered in VITA approved ruggedized 3U and 6U size packages with internal conduction cooling and high speed backplane connectors.

JEFF CONDOR is the tactical spectacle for Military & Enforcement who need ultimate protection. Shape memory alloy gives secure fit & maximum comfort. JEFF CONDOR is an innovative product that can minimize visual disturbance caused by fogging by applying Anti-Scratch & Anti-Fog coating on the inside and outside of the lenses. It can offer up to 99.9 protection form UV rays. It is compliant with ANSI Z87.1 standard requirement, and European CE standard, and exceed U.S Military eyewear ballistic resistance requirement MIL-PRF-32432A. Thin temples enable compatibility with communication systems and helmets.

The beginning of the mission given to ammunition The mission of all ammunition begins with the fuse. We are developing and mass-producing fuses based on our many years of experience in developing and mass-producing various fuses to meet the needs of users, including electronic timed fuses, mechanical fuses, and training fuses. Completion of mission given to ammunition Warheads such as penetrating warheads for penetrating power, thermobaric warheads using thermal pressure, and dispersion warheads for suppressing local targets play the role of completing the final mission of the ammunition. Korea Defense Industry has many years of experience developing and mass producing such warheads.