EM21 is designed to be used behind the EOST EDS Red Dot Reflex Sight. EM21 can be mounted right behind the EOST EDS (or any of other dot and holographic sight) to give 3 times magnifying view. EM21 helps shooter convert the optical magnification so that he can have better target acquisition and fast target engagement capability. The ability to transition between the two distances almost instantly and still maintain weapon accuracy is easily achieved with our EM21. Simply switch the magnifier out of the way for a quick 1X targeting. EM21 can be used for hunting/recreational purpose.

Ultra-High Density: With a pin spacing of 0.025 inches, it achieves maximum miniaturization and lightweight design. Ultimate Reliability: Designed to ensure perfect signal integrity even in harsh environments. Durability: Boasts outstanding environmental resistance that meets military and aerospace standards.

ElectroAir’s mobile APA-65 -series combined units consist of frequency converter units (AC rated output power up to 45 kVA) and rectifier units (DC continuous current up to 800A). These units are intended for the ground servicing of all aircraft types with a frequency of 400Hz and voltage 115/200 V and to power on-board electrical equipment and launch aircraft/ helicopters with a voltage of 28.5 VDC. APA-65 series is designed to eliminate CO2 emissions with its unique technical characteristics. Diesel hybrid unit and battery driven unit - unit can perform the complete service of aircraft at remote parking places with diesel engine / through batteries and it is also capable to operate from the 50/60Hz, 400V, 3 phase main power supply grid as any electrical GPU, without fuel consumption and with zero operating emissions. The range of different APA configurations with no emissions allow for safer, cleaner and more practical operational conditions for operators and personnel at the location. These units are very compact in size and weight.

The KX1-3046 is an X-band high-power MMIC amplifier fabricated on the GaN-on-SiC process. It operates from 8.0 – 10.5 GHz and typically provides 30W saturated output power with power-added efficiency of 46%. The KX1-3046 can support military and commercial radar systems. It is matched to 50Ω with integrated DC blocking capacitors on both RF input and output ports. The KX1-3046 is 100% DC and RF tested on-wafer. It is available in chip form. **Key Features** - Frequency Range: 8.0-10.5GHz - Small Signal Gain: 28dB - High Pout: 30W - High PAE: 46% - DC bias: Vd=28V @Idq=0.6A - Pulsed Vg: PW=100µs, DC=10% - Chip size: 2.95x3.1x0.1mm  

Flow Switches

- We have developed a lightweight AAM/UAM seat using composite materials, achieving a weight reduction compared to conventional seats. - A modular design that accommodates various aircraft models allows for customization according to the needs of each customer. - A design compliant with aviation safety regulations, utilizing our existing EASA DOA (Design Organization Approval).

Continental connectors are manufactured with highest quality materials. Our contacts are machined to close tolerances as opposed to stamped and formed styles. All molding compounds are glass reinforced, flame retardant and able to withstand severe environmental and mechanical requirements. Military connector families conform to the highest Defense Supply center (DSCC) standards, which require qualification testing and continued periodic requalification under the surveillance of government representatives to maintain our Company Qualified Product Listing (QPL)

By affiliating with asahi-Kasei EMD in 1999 recognized as a greatest electronic and chemistry company in Japan, we have been supplied Master roll by Asahi-kasei and that allowed us to meet our customer's needs from the time our company was established. We supply not only household products but also high technology semiconductor package products for domestic market.