- Compact size with built-in drive, position sensor, DC motor and gear box - Better durability & faster speed under similar rated load comparing to 12Lf series thanks to the bigger 17mm diameter DC motor - Position, current and speed control along with position & current feedback - Easy digital extended I/O control through 4 x Expansion I/O ports (No coding) - 27/37/50/87mm(*) stroke option (*): Each 3mm stroke can be added when adjusting the long stroke limit through Total Manager software. Rated load of 17N~70N depending on the lead angle for each stroke (Speed is inversely proportional to the rated load, so the higher the rated load, the slower the speed.) - RS-485 MODBUS-RTU protocol applied (IR open protocol is not provided) - Action feature which enables user’s motion save & run

Wheels that can drive the tank

Key Features Revolutionary speed enabled by advanced LFD technology High-resolution and highly accurate prints Compatible with a wide range of resins including functional and engineering materials Dimensions: 390 × 367 × 554 mm Build Volume: 200 × 125 × 210 mm Weight: 18.3 kg Specifications XY Resolution: 25μm Minimum Layer Thickness: 25μm Maximum Print Speed: 100 mm/hr

EO/IR Payload System EOTS (Electro-Optical Tracking System) is an electronic optical image tracking device that identifies danger and emergency situations on the battlefield, monitors and tracks tragets, and calculates their coordinates, and is an essential equipment for drones that can be used in both military and private sectors. M1 and M2 were developed to use a common mount that connects to the drone by keeping the size of the gimbal assembly the same at 4 inches. M1 can be recognized at a maximum of 0.2km for humans during the day and at night, and M2, which operates in adverse conditions at night, can be recognized at up to 1.0km for tanks in the form of IR continuous zoom.

Woori DS Co., Ltd. has developed firmware for a cooling and heating air conditioning system that performs all controls, fault diagnosis and communication for heating and cooling control and positive pressure control inside an armored vehicle, and developed an inverter control device capable of controlling communication with the armored vehicle body system and monitoring error situations. We are developing products based on the best technology and competitiveness to satisfy customer requirements for electrical equipment required for armored vehicles. In addition, we have developed an air conditioning system blower durability test device that can test the durability of air conditioning blowers, and we have secured test and evaluation technology for blower durability by checking blower errors and performing cycle management. By continuously securing innovative technologies in the defense industry, we are expanding our electronic device development business to deliver new value and impress customers with the highest quality and trust from product design, development, and mass production.

C-UAS 30kW SBC HEL Source

[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

- A red light mounted on the left side of the aircraft to indicate the aircraft's location - A green light mounted on the right side of the aircraft to indicate the aircraft's location - These lights indicate the aircraft's position, flight direction, and attitude - Visible/IR Mode, Steady/Flash Mode - Light Intensity : FAA FAR 29.1391 ~ 29.1395 - SAE ARP 5825A