Large Area Display Head Unit is included in avionics equipments used in the cockpit of an aircraft. Its wide screen vision development implements Full Glass Cockpit in aircraft. It also provides processing with more efficient yet less complicated circumstance with maximum 4 external input video signals Options that can be provided are - 20"x8" LCD Glass, LCD Module and Entire LAD system unit

Input : 24VDC Output : 270VDC N+1 System

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

The SWIFT-EI is the world’s first SWIR detector to feature a state-of-the-art read-out integrated circuit (ROIC), enabling low size, weight, power, and cost (SWaP-C). It supports VGA image format for SWIR imaging, multi-spot ALPD (asynchronous laser pulse detection), and a rapid imaging frame rate of up to 1,600 frames per second. The revolutionary ROIC introduces an independent neuromorphic imaging stream for event detection, which greatly expands capabilities in target detection and classification. Ideal for cutting-edge, low SWaP-C applications, the SWIFT-EI can be integrated into a variety of air platforms, missiles, vehicles, and handheld devices, making it extraordinarily versatile. With SWIFT-EI, SCD’s customers always have the advantage of being the FIRST TO SEE.

The Euroflir™ 410 family allows fixed, rotary-wing aircraft & UAV to carry out, in any conditions, intelligence, protection, search and rescue missions thanks to long-range observation and accurate targeting and designation capabilities. Very-high-resolution multispectral cameras Euroflir™ 410 operates in four spectral wavebands - TV, NIR, SWIR, MWIR – with a wide field-of-view and ultra-long-range observation, allowing it to function at standoff distance any time day or night. The Euroflir™ 410 is specially adapted to the wide variety of missions: supporting law enforcement, homeland security, border and coastal surveillance, intelligence, SAR and CSAR. Euroflir™ 410 : a modular system in 3 main versions EuroflirTM 410 Surveillance: eyesafe target range measurement and 3D location-determination. EuroflirTM 410 Marking: target marking for either crew members or allied ground forces with night vision goggles. EuroflirTM 410 Designation: accurate designation with suitable laser coding for laser-guided weapons. Advanced embedded functions Improved situational awareness: moving map & augmented reality (visualize the line-of-sight, define points of interest on a digital map, real-time video). Automatic detection: Moving Target Indicators (MTI) & Hot Spot Detection (HSD). Enhanced identification: Super resolution & Fusion.

Military actions today depend on effective use of the electromagnetic spectrum to surveil and assess the battlespace, to protect friendly forces and equipment, and to attack the enemy. That is today's Electronic Warfare (EW), and maintaining a technological advantage across the electromagnetic spectrum can mean the difference between whether or not you complete your missions and bring your forces home.

It is especially suited for demanding applications, which require reliable performance, such as missile seeker gimbal stabilization, where small size and low power consumption is required, while in a low cost design that is also ideally suited for high volume commercial applications. System Performance PARAMETERS SPECIFICATIONS Standard Ranges ±100°/sec, ±200°/sec, ±400°/sec Input Voltage + and - 5.0 Vdc Bandwidth 110 Hz Output Noise < 005°/sec/√Hz Scale Factor Accuracy ±1% Nominal Features Dual Axis Capabilities in Small Form Factor Miniature Size: Only 25gm.(1.05” x 0.71” diameter) Hermetically Sealed In Stainless Steel Cylinder High Reliability DC Input/High-Level DC Analog Output Low Cost Applications Tank Turret Stabilization Missile Targeting Platform Stabilization Antenna Stabilization Camera Stabilization Spacecraft

The semi-automatic ViscoTec mix-on-demand station is already in successful use as a mobile system. For reliable mixing and dosing of two-component materials, in situ. Two-component materials are commonly processed using premix cartridges, hardener rod cartridges or by mixing two components by hand. The disadvantages are obvious: The risk of human error, enormous material waste and high production costs offer every reason for taking the automated route. With ViscoTec filling stations, epoxy resins, polysulfides and polyurethanes can be removed from larger containers and filled on-demand with the exact quantity required. The dosing is volumetric on a component or a filling container. A typical application is dosing in so-called inserts (thread inserts). The compact arrangement of the components on a mobile frame guarantees the operator maximum flexibility. The design as a stationary system has already been implemented several times.