It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

Linden Photonics cables ensure stability and reliability even in extreme environments. With patented LCP jacket, non-kink design, maximum continuous length of 50 km, and crush-resistant durability, Linden Photonics provides high-performance cables optimized for deep-sea and aerospace applications.

Pandion Perception provides a robust solution for autonomous navigation, Advanced Driver Assist (ADAS) and mapping in GPS-denied environments, efficiently generating the low-latency spatial data that every autonomous system needs. Mounted on ground vehicles or uncrewed platforms, our 3D spatial sensing systems enable operation environments where GPS is degraded or denied - such as dense urban areas, subterranean infrastructure, or contested military theatres. These capabilities are tailored for missions and logistics operations, offering reliability and precision where traditional systems fail.

The ASN-157 was developed to meet the ongoing need for helicopters with reduced size and weight avionics. The ASN-157 system has an accuracy of 0.15 percent of total velocity, weighs less than 13 lbs., consists of one line-replaceable unit, and has a predicted mean time between failure of over 7,300 hours.

K2 online mall

Ultra-High Density: With a pin spacing of 0.025 inches, it achieves maximum miniaturization and lightweight design. Ultimate Reliability: Designed to ensure perfect signal integrity even in harsh environments. Durability: Boasts outstanding environmental resistance that meets military and aerospace standards.

ALTERNATIVE TO M19648/1 SERIES

This Military Field-Grade Uninterruptible Power Supply units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. This UPS incorporates field proven high efficiency designs and rugged packaging technologies. This UPS units will accept a wide range of input voltage and frequency values while delivering a well-conditioned AC or DC output to the load. The use of lithium ion batteries permits the lowest profile and lowest weight solution in its power class. It is designed and manufactured in SynQor’s USA facilities to comply with a wide range of military standards. Options include two DC outputs, a DC input rated for military 28 VDC sources, and an electronic breaker on the AC output to permit fault-tolerant parallel operation for higher power and/or N+M systems.