Safran Engineering Services was selected by Honeywell for the STC development for multiple rotorcrafts. Safran Engineering Services took responsibility as the design authority for the design, development, integration, installation, testing, tech pubs and STC approval under FAA, EASA and TC agencies.

The Nebula connector employs the renowned Hypertac hyperboloid contacts as the bedrock of its high reliability providing immunity to shock and vibration fretting and over 100,000 mating cycles. These features combine with current carrying capacity up to 1.5 Amps per contact and low insertion / extraction forces to provide significantly enhanced quality and reliability performance compared with other more commodity connector solutions. Available for direct mounting to PCB, the Nebula Series supports independent function for all its 22 contacts. It also offers optional quarter-turn locking hardware for faster connector securing and to prevent unintentional separation.

Maximum Control for your interactive graphical displays. Developing HMIs for safety- and mission-critical avionics and embedded displays only gets more demanding. VAPS XT offers HMI designers, systems engineers, and embedded engineers maximum control and flexibility for creating interactive real-time graphical displays for avionics and other safety-critical embedded applications. With an open architecture and integrated logic capabilities, VAPS XT provides the essential features for the design and deployment of certifiable cockpit displays. VAPS XT provides a model-based environment supporting all phases of development from initial concept to embedded deployment. Through a flexible porting structure, VAPS XT applications can be easily deployed to virtually any embedded target with excellent performance.

Developed by MPS Microsystems, the voice-coil nano-positioner unites a Lorentz-force motor, flexure guidance and on-board electronics inside a 65 × 60 × 38 mm envelope. Standard travel is 2.88 mm, extendable to 7 mm with the same coil, suiting microscope objectives, small mirrors and sensors that demand friction-free motion. Bidirectional repeatability stays within ±1 µm over a 360 µm stroke and ±2.5 µm across the full stroke. We can tailor mounting plates, objective clamps and cable exits to suit your specific requirements, ensuring that this voice-voil actuator can be integrated seamlessly into your system.

ㅇKey Features - Low Dielectric Permittivity / Low Weight / Low Cost - Possible Customization - Operating Temperature : -40℃∼ +900℃ - Random Vibration : 6.1Grms , 20 Hz to 2000 Hz, 3 axis - Shock : 20 G (Minimum Peak) Sawtooth , 3 axis - Altitude : Up to 160,000 ft (0.929 mbar) ㅇQuality and Certification - MIL-STD-810G

The VPX power supplies are compliant with VITA 62, MIL-STD-704, MIL-STD-461 and MIL-STD-810 for 28 Vin DC, 270 Vin DC & Universal AC systems. The VPX delivers up to 1000 W and up to 6 outputs with a typical efficiency of 91%. Offered in VITA approved ruggedized 3U and 6U size packages with internal conduction cooling and high speed backplane connectors.

AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. Linear Acceleration Compensation Certus Mini uses an innovative algorithm to compensate for linear accelerations. This allows Certus Mini to maintain accurate roll and pitch through short term linear accelerations that typically cause significant errors in competitors systems. For long term linear accelerations Certus Mini supports the addition of an external GNSS receiver for full acceleration compensation. Extensive Interoperability Certus Mini seamlessly communicates with a wide range of industry standard protocols including NMEA 0183 and CANOpen making it easy to integrate into existing systems. Certus Mini effortlessly interfaces with ROS 1, ROS 2, and Ardupilot, streamlining your development processes for maximum efficiency and effectiveness.

• Band Width : L1/L5 or L1/L2 • Supported GNSS Constellations : GPS/Galileo/NavIC/GLONASS/BeiDou • Interference resistance : - Single jammer interference resistance up to 90 dB(J/S) - Multiple jammers interference resistance up to 82 dB(J/S) - Support of up to 3 jammers simultaneously for each of frequency bands • Interfaces : Digital output • Power Consumption : Low power consumption