Features Solid-state, maintenance-free, modular components for optimal mounting of controls, sensor, and display Automatic compensation ensures the highest degree of accuracy (±1º) LCD display with adjustable backlighting for easy viewing in all conditions Variable control of electronic damping for use in rough seas Meets demanding military standards for years of reliable performance Dual compensation for degaussing on and off Applications Naval vessels including aircraft carriers, battleships Smaller naval boats Amphibious craft

Oil filter/transfer cart : Mobile fueling cart that supports oil filtering, flow rate check, and transfer functions oil system skid : Each part that enables oil transfer, filtering, flow rate check, and refueling in the oil tank is compactly configured with a skid for easy use and installation of the system.

SEMIL-2000GC is an extreme-rugged IP69K dustproof and waterproof edge AI platform in a 2U 19" rack-mount form factor. SEMIL- 2000GC incorporates Neousys' best-in-class thermal design to ensure fanless maximum GPU performance in wide range -40°C to 70°C temperatures. The system is also integrated with an NVIDIA® L4 GPU that offers up to 2.5 times the performance over Tesla T4.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

Localization development in progress for general components of Tank

The NSP-7 combines IMSAR’s typical reliability with increased capabilities: for example, the ability to detect footprints. It can even perform SAR Motion Video (SMV) when paired with an airborne server. The IMSAR NSP-7 radar system is a high-performance, weatherized radar pod engineered for long-range Intelligence, Surveillance, and Reconnaissance (ISR) and maritime/ground surveillance missions. With advanced Synthetic Aperture (SAR) and Moving Target Indication (MTI) capabilities, the NSP-7 delivers exceptional imaging and detection in a rugged, low-SWaP (Size, Weight, and Power) package.

The NYX series is a completely redesigned thermal imaging camera platform designed to deliver unsurpassed performance with state-of-the-art technology, which can always provide good thermal imaging in dark and bright areas without user adjustment. NyX technology enables you to experience improved situational awareness. • Detector type : Cooled InSb 15μm (1280 x 1024) • NETD : <25mk typical (without lens) • Continuous ZOOM LENS • Continuous Digital Zoom • Advanced image processing - Auto Gain Control (AGC) - Adaptive Histogram Equalization (Adaptive HEQ) - Local Area Enhancement (LAE) - Digital Detail Enhancement (DDE) - Denoise Reduction (DNR) - Sharpness • MTTF(Mean Time To Failure) 12,000 hours • Various color sets (WhiteHot / Rainbow / Twilight / TwilightShifted / Turbo / Iron / Plasma)

Our PIT systems are built to withstand the toughest weather conditions and meet international aviation standards. Our versatile configurations are tailored to your operational needs - from compact access units to advanced pop-up mechanisms. PIT system types: MINIPIT Hatch Systems – Compact and simple underground solution for smaller aprons or light traffic zones. Standard Hatch PIT Systems – Durable and reliable access pits for electrical, fuel, and IT systems under the apron. Pop-Up PIT Systems – Mechanized lifting PIT system for convenient and fast surface access when needed. Each system offers specific advantages depending on the scale, type of aircraft, and regional standards of your operations.