Developed and manufactured by MPS Microsystems based on customer specifications, this lens actuator forms an essential component of a laser guidance system for unmanned flying objects. It enables 2 lens groups to be displaced individually over a total range of 48 mm and makes it possible to focus a laser over a distance of several kilometres. The main technical difficulty inherent to this actuator lies in meeting very stringent requirements for alignment between the two lens groups (< 10 µm) and in maintaining a very small tilt of the lenses over their entire stroke (lateral deviation < 2 µm). The key part making it possible to ensure such specifications is a frame machined by milling from an aluminium block, into which the 2 drive systems are fastened. These systems each consist of a Ø16 mm brushless motor and a Ø4 mm ball screw with an axial play of less than 5 µm. Backlash-free and frictionless sliding of the lens holders is ensured by standard L306 linear ball bearings manufactured by MPS Microsystems.

DS Aether CT provides various industrial Gas Tube Trailers such as Helium (He), Hydrogen (H2), Neon (Ne), Nitrogen (N2) and Argon (Ar), as well as CNG. The working pressure is set to national requirements or customer's demands such as 166 bar, 200 bar, or 250 bar. The color of the jumbo tubes and skid frames follows ISO color codes, or the designations of customers.

*Perfect automatic camera matching for all types of vision cameras. *Fully supports the Camera Link interface (Area/Line Scan). *User-friendly,No need to modify firmware for frequency compatibility. *Compatible with "10 TAPS@85MHz" internal/external RS232C, all baud retes(20MHz~85MHz),and digital user IO. *Compatible with Base/medium/Full configurations. *Provides camera power from the Tx box. *SFP type module *Works with moving and non-moving fiber cables.

Learn more about Tronair's technical manuals, troubleshooting, maintenance schedules, and products - plus our 3 authorized service centers located in Europe, 2 in Asia and 1 in North America allow our customers close and convenient locations to have any Tronair equipment repaired and tested.

MTS-3060A SmartCan is a Universal O-Level Armament Test Set

The ACTUS® CORE-2 Dot Sight is a high-performance optical device chosen as the Warrior Platform Selection Equipment by the Republic of Korea Army (ROKA). Built to MIL-SPEC standards, it is a further development of our ACTUS® CORE-1 Dot Sight. Housed in a smaller form factor, the ACTUS® CORE-2 meets rigorous military requirements, including extreme temperature resistance, shock testing, waterproofing, and protection against fluid contamination. Designed for durability and reliability, the CORE-2 enhances operator safety in the field, ensuring quick and precise target acquisition during critical missions.

The SCXMC-SFPDP is a high-speed optical communication card that operates through the XMC interface of the SBC. It is designed to transmit and receive large volumes of data between the SBC and other devices in real time. Unlike Ethernet, which can be difficult to synchronize, the SCXMC-SFPDP uses optical communication with synchronization signals, enabling precise and high-speed data transfer. It offers low response latency (<40 µs) and supports four transmit/receive channels at 3.125 Gbps per channel. A device driver program is required for operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system to ensure reliable real-time data transmission between mission-critical subsystems.