The NSP-2 is designed for integration on Modular-Payload (MP) compliant Unmanned Airborne Systems (UAS), and each unit undergoes thorough testing to ensure its reliability. Instead of a mechanical gimbal that requires regular maintenance, IMSAR’s NSP-2 uses an innovative 2D Electronically-Scanned Array (ESA) antenna to enable quick scanning in both azimuth and elevation. The NSP-2 works in the Ku-band using multiple modes, such as Synthetic Aperture Radar (SAR) imaging, Magnitude Change Detection (MCD), and Ground and Maritime Moving Target Indication (MTI) at low altitudes.

InterGravity Technologies has developed a Type-III Composite Overwrapped Pressure Vessel (COPV) optimized for high-performance small spacecraft propulsion systems. The tank is designed with an aluminum alloy liner for impermeability and a carbon fiber/epoxy composite overwrap for high strength-to-weight ratio. The system is tailored for green propellant storage (C₂H₆, N₂O), offering an exceptionally lightweight yet robust solution for orbital transfer vehicles and CubeSat-class platforms. Technical Specifications - Type : Type-III COPV (Al liner + CFRP wrap) - Volume : 5.3 liters - MEOP : 75 bar - Proof : 230 bar - Burst : 250 bar - Dry Mass : < 1.0 kg

Developed in 2002 as a single-soldier, short-range, anti-tank weapon system, we continue to work with soldiers to provide the weaponry needed to succeed. Backed by nearly two decades of experience, the resurgence of the tank in battle validates our expertise in this field. It’s the same old story – and David still beats Goliath.

The SC-SBCRTM, a Seedcore Co., Ltd representative product, is a backplane transmission module that performs the I/O function of the SBC627. When the SBC627 board is plugged into the motherboard(Backplane) in front of the Chassis, you can extend the I/O function of the board by plugging the SC-SBCRTM board into the back of the Backplane.

Various line up, high torque frameless motor capable of precise speed and position control. Application areas are Collaborative robots, Dog Horse robots.

The SCXMC-SFPDP is a high-speed optical communication card that operates through the XMC interface of the SBC. It is designed to transmit and receive large volumes of data between the SBC and other devices in real time. Unlike Ethernet, which can be difficult to synchronize, the SCXMC-SFPDP uses optical communication with synchronization signals, enabling precise and high-speed data transfer. It offers low response latency (<40 µs) and supports four transmit/receive channels at 3.125 Gbps per channel. A device driver program is required for operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system to ensure reliable real-time data transmission between mission-critical subsystems.

Interconnect Wire Harness and Cable Assemblies are the connectivity backbone of electronic systems. Fabricated in a factory setting, build-to-print wire harness assemblies enable the OEM manufacturer to reduce the time and expense of in situ interconnection of electronic devices used in complex air, sea, land and space applications.

A world well know Aviation Ground Support Equipment (AGSE) in support of military and commercial aircraft