Safran’s TG600 is a 600 kW hybrid-electric turbogenerator—derived from the Arrano turboshaft and paired with GENeUS generators—designed to serve as the core propulsion component for Electra’s nine‑passenger eSTOL aircraft.

A ground control system that establishes unmanned aerial vehicle missions, controls aircraft and mission equipment, reads image information, and transmits it to higher-level units.

The Crane stands as a state-of-the-art Mid-Wave Infrared (MWIR) detector. This device features a 5-megapixel resolution in a 2560×2048 format with a fine 5μm pitch. It is based on SCD's established XBn technology or Hot Full Midwave (HFM) and incorporates a digital readout circuit developed using an advanced CMOS process. The High Operating Temperature (HOT) Focal Plane Array (FPA) functions efficiently at 150K or 120K, enabling a large-format detector that excels in image quality while maintaining a relatively compact size, weight, and power consumption. SCD continues to lead in innovation.

[Infrastructure long products] For the cutting of high-performance materials and titanium alloys, the Service Center Switzerland has 9 powerful circular and band saw machines for precise cuts up to a diameter of 350 mm. BIBUS METALS AG has had experience in cutting special grades since the company was founded in 1979. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Deburring of bar blanks - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Chamfering and pointing of bars [Infrastructure flat products] The BIBUS METALS Group has machining facilities at several locations in order to implement professional processing of customer requirements. We use specialist sheet/plate shears for high-performance materials and titanium alloys up to a sheet thickness of 12 mm. In addition, the group has one of the largest fully automatic plate saws in Europe. The Behringer type LPS 25-125-6A saw can cut titanium plates up to a size of 2000 x 6000 mm and a thickness of 150 mm according to the customer's requirements. Waterjet cutting is carried out with our own machines or in cooperation with selected partner companies. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Shearing up to 12 mm thick - Sawn for panels up to 150 mm thickness with tolerances of -0/+3 mm - Circles/rings or any shapes according to drawings will be water jet cut or precision water jet cut

[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

Integrated logistics support division, a Vendor Item Tool Manager, Consumables & Special Cutting Tools, Fixed and Rotary Wing String Lighting.

The core of the next-generation intelligent protection system Efficiency in the battlefield environment by building a highly intelligent weapon system with multiple spraying control technology for precise injection and remote control of multiple objects (intelligent mines), complex sensor-based intelligent ammunition design technology, and platform interlocking and cluster attack protection system integrated design technology. Development is underway to maximize effectiveness. Instead of conventional mines, we integrate technologies used in the 4th industrial revolution such as wireless power transmission, wireless communication, complex sensor control swarm control algorithm, and signal processing between location information, and develop the core technology of the intelligent mine system to efficiently operate the weapon on the battlefield. You can maximize the effectiveness of the system.