Slice6 AIR, Slice6 Air BR 는 극한 시험 환경에서 아날로그 신호를 정밀하게 측정할 수 있도록 설계된 통합 데이터 수집 장비로, 크기, 무게, 전력(SWaP)에 최적화되어 제한된 공간과 질량 조건에서도 효과적으로 운용할 수 있습니다. 각 모듈은 마이크로프로세서, 이더넷 스위치, 신호 조정 회로, 비휘발성 메모리를 포함하고 있습니다. 독립형, 네트워크형, 기존 시스템 통합형 등 다양한 운용 방식에 대응하며, IRIG 포맷 기반 실시간 스트리밍과 이중 저장 기능을 통해 실시간 모니터링과 백업을 동시에 수행할 수 있습니다. Ethernet-based data acquisition unit (DAU) for flight test and ground shock test. SLICE6 AIR, SLICE6 AIR BR is a complete data acquisition unit for measuring analog signals in extreme test environments. Optimized for size, weight, and power (SWaP), SLICE6 AIR is ideal for applications with tight size and mass constraints. Each module features a microprocessor, Ethernet switch, signal conditioning, and non-volatile memory. The versatile SLICE6 AIR can be used standalone, networked for high channel count tests, or integrated into existing Ethernet-based flight test instrumentation. Real-time streaming in IRIG formats and dual store-in-place recording enables both real-time monitoring and redundant back-up of data on a single device.

Plane Windows are used as substrates for a variety of applications, such as laser window, output couplers, beamsplitters, beam combiners, mirrors, dichroic filters and plate polarizers. Considerations in selecting window substrates include transmission range, absorption coefficient, incident laser power density and environmental factors such as pressure, temperature, moisture, abrasion and corrosion. Plane Windows listed under UV / VIS / NIR substrates are specified for applications involving coating wavelengths 193nm ≤ λ〈2.0 μm. Units for these substrates are given in mm. Plane Windows listed under IR substrates are specified for applications involving coating wavelengths λ≥ 2.0 μm. Units for these substrates are given in inches. Refer to the THIN FILM COATINGS section for information on coatings that can be applied to these substrates.

We are one of the world's leading manufacturers of both military and commercial aircraft ground support equipment. Hydraulics International, Inc. is proud to be one of a few small companies having the total self sufficiency in the design and fabrication of aerospace ground support equipment.

Hydraulic top bracing is an attenuation device installed between the main engine and the hull of the ship to reduce thermal expansion and vibration from the main engine to natural frequencies. The operating principle is an automatic control operating system through in/out and on/off the operating range of the hydraulic top bracing according to the rpm of the main engine. The number of hydraulic cylinders per engine is typically 2, 4, 6 depending on the type of engine, up to 8 are installed if necessary, and 1~2 of control panels are installed.

- Comprehensive High-Frequency Electromagnetic Simulation - Analysis of ships, submarines, aircraft, fighter jets, and satellites including antennas - EMC and EMP analysis including cables - Radome and multi-antenna interference analysis - Wireless coverage, network planning, and spectrum management

The DA 15‐N is our smallest and lightest full brushless actuator. Its brushless motor and contactless, wear-free position sensing system makes the DA 15‐N immune to wear, vibrations and shock loads. It has especially been designed for usage in harsh environments and for safety-critical applications that require an actuator with high endurance. The conductive aluminum case and the shielded connection cable are reducing the susceptibility to any kind to EMI/RFI noise to the absolute minimum. The servo features position, temperature and current feedback as a standard and is fully programmable.

- Urban drones specialized in surveillance/spatial information/disaster safety/facility survey - Completed localization of core components! Equipped with encryption KCMVP Dimensions (WxLxH) : Flight / 360x360x160mm(h) Folding / 260x260x160mm(h) Airframe Weight : 2kg or less (max take-off weight) GNSS : RTK / GNSS (SBAS supported) Flight Time : 30 minutes

Superior Performance: Stable braking power under extreme operating conditions, from taxiing to high-speed landings. Proven Reliability: Robust structures and advanced materials that guarantee long service life with minimal maintenance. Optimized Safety: Redundant design features and compliance with international aviation standards to meet the highest levels of operational safety. Custom Solutions: Tailored brake designs to fit the specific requirements of fixed-wing aircraft, rotary aircraft, and unmanned aerial platforms.