- A white light mounted on the rear side of the aircraft to indicate the aircraft's location - These lights indicate the aircraft's position, flight direction, and attitude - Visible/IR Mode, Steady/Flash Mode - Light Intensity : FAA FAR 29.1391 ~ 29.1395 - SAE ARP 5825A

The S10s, the first model of the PabloM series, is a loitering munition designed for strike missions. Leveraging mesh communication and AI-enabled swarm flight, it can execute both simultaneous and sequential self-destructive strikes against targets, effectively neutralizing diverse “anti-drone” systems. The S10s launches autonomously from a dedicated platform and can sustain flight for over 30 minutes, enabling wide-area operational coverage. When engaging a target, it performs a steep dive of up to 45 degrees at speeds reaching 150 km/h, ensuring rapid and precise impact. Built from lightweight foam-board materials, the S10s is optimized for fast, large-scale production during operations. Furthermore, its modular open-architecture design, aligned with the K-MOSA concept, allows mission payloads to be quickly swapped and integrated, delivering exceptional flexibility and interoperability in real combat environments.

- The 2nd generation mightyZAP series supporting dynamic speed & current control as well as position control along with position & current feedback - Built-in drive circuit, position sensor, 12mm diameter coreless DC motor and gear box - 27/40/53/90mm stroke option - Rated Load of 12N ~ 100N according to gear ratio for each stroke (Speed is inversely proportional to Rated Load, so the stronger the Rated Load, the slower the speed.) -Support RS-485 or TTL / PWM communication * TTL / PWM communication version operates by automatically recognizing the input TTL / PWM signal * When using PWM communication, only the position command is available without position feedback (For feedback feature, use TTL or RS-485 communication) Both MODBUS RTU and IR open protocols available (Default : IR Open protocol)

• Airframe wires & cables • Coaxial cables • Fire-zone & H.T. area cables • Power transmissions • Databus, quad ethernet & optical fibers

With durable constructions, GORE-FLIGHT Microwave Assemblies provide reliable performance for critical aircraft systems. To improve signal integrity and reduce interference, they incorporate shielding that meets and even exceeds the 90 dB requirement. A consistent impedance of 50 ± 1 ohms ensures a lower insertion loss and more reliable VSWR than leading competitors, both before and after installation. GORE-FLIGHT Microwave Assemblies also deliver the following benefits: Durability for the Life of the System Cost-Saving Performance

Our transport drone is designed for efficient and reliable cargo delivery. With precise and stable flight performance, it supports real-time monitoring of delivery routes and environments through an advanced camera system, ensuring safe and timely operations.

The Pulse-80 is a premium tactical-grade MEMS IMU, engineered for applications demanding compact size and minimal weight without any compromise on performance.

GP division is producing Glass paper in the wet by glass fiber fabric as a main ingredient. Glass Paper has a dimensional stability, heat resistance, chemical resistance, electrical insulation, Print Processability, heat insultion and so on. Due to its advanced quality, the Glass Paper is used by many manufacturers globally for floorings, buildings, exterior electronics. Also, it is used for inorganic filter products, and diverse parts are under researching as its demands rise up.