Poongsan has been producing a variety of copper and copper alloy plates, ranging from copper products for everyday life to high-tech industrial materials. These copper and copper alloy plates, which are recognized as high-quality materials at home and abroad, are representative industrial basic materials that are widely used in all industrial fields, including automobiles, electrical and electronics, semiconductors, communications, construction, and machinery. Poongsan has various casting facilities, including the world's largest shaft furnace, a hot mill capable of continuously rolling 6-ton slabs, a tandem mill, and a 20-stage cold rolling mill, as well as various hot and cold rolling facilities and heat treatment furnaces. We are building a large-scale integrated production system from the casting process to finishing processes such as cutting and packaging. Poongsan's rolled products are produced in various sizes depending on the type, ranging from 630mm in width, 0.03mm in thickness, and thickness tolerance to 2/1000mm. These products have accurate specifications and physical properties and a smooth surface thanks to the establishment of a thorough quality control system using cutting-edge inspection equipment. Excellent. Poongsan's copper and copper alloy rolled products are produced in a variety of ways, including pure copper, brass, phosphor bronze, nickel silver, cupronickel, and special alloy (PMC26 and other) depending on the alloy composition and casting method. In particular, in response to market demands for new high-strength copper alloys due to technological advancements such as the Internet of Things and electric vehicles, we have developed new alloys (P1000HS and others) and are applying them to high-tech products requested by customers.

Wing shells, side shells and fuselage sections are usually made of carbon fibre composites and glued together during the production process. With many components, a groove or an open edge remains after the bonding process, which must be filled or sealed. A modified two-component epoxy resin is often mixed and then applied manually. This often entails long production times and complex quality controls. Equally high material costs due to the processing of materials from cartridges. ViscoTec defies short pot life and materials that are difficult to handle: Thanks to a coherent overall system from material removal to material application, this process can be automated. The two components are taken separately from cartridges, hobbocks or drums and fed via hose lines to a two-component dosing system. Only at the very end of the process they are mixed in a static mixing tube and applied to the substrate (e.g. via a nozzle). The process is controlled and monitored by pressure sensors.

Modular and scalable, our Ground Combat Indoor Trainer’s (GC IDT) multiple configurations cover a rich variety of weaponry, including realistic small arms, support and anti-tank weapons. Highly realistic and durable replica weapons, a lifelike virtual weapons simulator and incredible accuracy combine to further enhance your troops.

Manufacture and delivery of main-part reflectors used in unmanned aerial vehicles.

The SCVPX-SSGM (Synchronous Signal Generation Module) generates synchronization signals to coordinate the operation and timing of various radar system components. It can generate synchronization signals using an internal clock, receive an external clock, or regenerate synchronization signals from external sources to maintain precise timing cycles. A device driver program is required for configuration and operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system, providing precise timing synchronization across mission-critical subsystems.

Main Characteristics Excellent broadband characteristics Radiation patterns virtually independent of frequency Only one antenna required to cover a wide frequency range Selectable polarization plane Sturdy construction Suitable for mobile use Main Use Optimized for radiomonitoring and measurements Design Owing to its broadband characteristics and the virtually frequency-independent radiation patterns, the SLP – 200M-001G covers a very wide frequency range The sturdy construction makes the antenna Suitable for stationary and mobile applications

L14F type liquid level switches

ARDRONIS는 로데슈바르즈의 드론 대응 솔루션 제품군입니다. 복합 시스템 접근 방식으로 고객이 각각의 고유한 최종 사용자 요구사항에 따라 악의적이고 비협조적 위협을 탐지-식별-위치 확인-추적-검증-대응할 수 있습니다. ARDRONIS가 RC 드론 활동을 탐지하면 드론 신호의 유형을 자동으로 분류하고, 드론의 방향과 조종자를 확인한 다음, 드론이 목표물에 도달할 수 없도록 무선 제어 링크를 차단합니다. 대부분의 상업용 원격 제어 드론은 최신 주파수 가변 파형인 FHSS(Frequency Hopping Spread Spectrum)를 통해 제어합니다(업링크). 기타 일반적인 드론 유형은 Wi-Fi을 통해 제어합니다(업링크). 드론에서 전송하는 신호(다운링크)는 일반적으로 FHSS, Wideband 또는 Wi-Fi 신호입니다.