- When flying in information, azimuth information about the attitude and position of the lead aircraft is provided to pilots of surrounding aircraft in the formation - Light Intensity : 6 cd (Beam Spread : 60) - NVIS Green A/IR per MIL-STD-3009

SAR Radar Antenna Assembly Module Telecommunication Radar Antenna Assembly Module

Developed and manufactured by MPS Microsystems based on customer specifications, this lens actuator forms an essential component of a laser guidance system for unmanned flying objects. It enables 2 lens groups to be displaced individually over a total range of 48 mm and makes it possible to focus a laser over a distance of several kilometres. The main technical difficulty inherent to this actuator lies in meeting very stringent requirements for alignment between the two lens groups (< 10 µm) and in maintaining a very small tilt of the lenses over their entire stroke (lateral deviation < 2 µm). The key part making it possible to ensure such specifications is a frame machined by milling from an aluminium block, into which the 2 drive systems are fastened. These systems each consist of a Ø16 mm brushless motor and a Ø4 mm ball screw with an axial play of less than 5 µm. Backlash-free and frictionless sliding of the lens holders is ensured by standard L306 linear ball bearings manufactured by MPS Microsystems.

NILO® Alloy 36 Bars-Sheets and Plates-Tubes and Pipes-Strip-Wire NILO® Alloy 48 Bars-Strip INCONEL® Alloy 230 Bars-Sheets and Plates INCONEL® Alloy 600 Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 625 Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 718 Bars-Sheets and Plates INCONEL® Alloy X-750 Bars-Sheets and Plates INCONEL® Alloy HX Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy A-286 Bars-Sheets and Plates NIMONIC® Alloy 75 Bars-Sheets and Plates NIMONIC® Alloy 80A Bars-Sheets and Plates NIMONIC® Alloy 90 Bars-Sheets and Plates-Strip-Wire NIMONIC® Alloy 263 Sheets and Plates UDIMET® Alloy 188 Bars-Sheets and Plates UDIMET® Alloy L-605 Bars-Sheets and Plates Waspaloy® Sheets and Plates Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 5 (6Al-4V) Bars-Sheets and Plates Material no. 1.4545.4 / 15-5PH Bars Material no. 1.4548.4 / 17-4 PH Bars Material no. 1.4546.9 Bars

The X-BEAM TECH HXB Connectors, featuring expanded beam technology, hermaphroditic connection, rugged construction for field deployment have been designed for harsh environment applications such as military tactical communications, avionics, offshore systems, outside broadcast, mining and plant. The expanded beam technology uses expanded and collimated beams to couple optical fibers without any contact. It could allow for optics to be used in areas that have been quite restrictive due to presence of damage or contamination at the fiber end. Hermaphroditic connector design enables fast deployment by daisy-chaining multiple cable segments. HXB series connectors also enable transfer of electrical signal or power using hybrid insert configuration.

Air conditioning units are designed for efficiency, durability, and environmental control, our units help ensure smooth ground handling and turnaround operations in all weather conditions Whether servicing commercial planes or private jets, our units deliver powerful and precise cooling and heating to ensure comfort for passengers and crew.

Phase shifter for Electrically Scanned Array Antenna

Shock Tech designs, develops, manufactures and tests shock attenuation and vibration isolation systems for the most demanding environments. Customized solutions are provided with application requirements analyzation. Low Profile & Avionics Mounts are a series of all attitude, mid to high frequency, low profile mounts, used in a variety of applications including airborne avionics, etc. Bushing Mounts are a series of all attitude, low cost mounts, protecting against both vibration and shock, used in a variety of applications including airborne avionics, etc.