The compact and lightweight device ranges distance up to 6,000 m and provides accurate angle measurements. The PLRF25C is ready for combat operation in the most extreme conditions. It is available in black, green and desert.

Mixed Signal Oscilloscope (4) Analog Channels, 10M record length, Certificate of Traceable Calibration Standard

The AMT-206-1 composite tail rotor blade is a direct replacement for Bell 206A and 206B series helicopter tail rotor blades. Now fitted with a new style of feathering bearings manufactured by KAMATICS. These bearings provide a longer life expectancy, with a patented lining that provides lighter pedal loads and a higher level of chemical resistance, compared to that of the standard fabric Teflon-lined bearings. The AMT-206-1 tail rotor blade has a non-symmetrical airfoil section and incorporates a swept tip. The T/R Blade is primarily fabricated from uni-directional Graphite (carbon fiber) and Aramid (Kevlar™) continuous fibers suspended in an epoxy matrix and is fitted with a nickel abrasion strip on the leading edge. The abrasion strip is bonded on using a urethane adhesive. The AMT-206-1 composite tail rotor blades have a 30% cost advantage, twice the lifespan, higher strength and thrust, and a substantial noise reduction, making them safer and ideal for helicopter operators flying in noise-sensitive areas like national parks and built-up areas.

*Perfect automatic camera matching for all types of vision cameras. *Fully supports the Camera Link interface (Area/Line Scan). *User-friendly,No need to modify firmware for frequency compatibility. *Compatible with "10 TAPS@85MHz" internal/external RS232C, all baud retes(20MHz~85MHz),and digital user IO. *Compatible with Base/medium/Full configurations. *Provides camera power from the Tx box. *SFP type module *Works with moving and non-moving fiber cables.

Fast & precise 5-axis exceeds expectations • 15000, 20000 r/min high speed spindle • B-axis/C-axis 0.0001 degree control as standard • Tool change time (C-T-C) 3.8s, 28% faster than previous model • Increased X/Y/Z-axis rapid traverse speed & acc./dec. • Cooling functions as std. on spindle, motor/LM guide/ball screw (X/Y/Z), C-axis table motor • Integrated thermal compensation systems for spindle and structure FURTHER INCREASED MACHINING CAPACITY • Ø630mm dia. 2-axis tilting table, 26% increased compared to previous model • Max. Ø600 x H500mm machining area, 32% increased compared to previous model • Max. 400kg table load capacity with stable table support structure • X/Y/Z axis travel distance 650/520/480mm, up to 20% increased compared to previous model EASY ACCESS, EASIER OPERATION • Easy setup of workpieces with 580mm distance between operator and table center • Easy tool exchange by placing the tool magazine door on the front and applying a tool removal device (Auto Kicking Device) • Improved chip disposal capability with enhanced coolant flood & flushing functions • Grease lubrication system • Compact integrated automation system (AWC)

No Coding Required: Create XR content effortlessly with a drag-and-drop interface. Industry-Specific Solutions: Suitable for manufacturing, logistics, energy, and various industries. Multi-Device Compatibility: Works on PCs, tablets, smartphones, and smart glasses (VisionX). Real-Time Collaboration: Multiple users can edit and share content simultaneously.

Magnetic sensors (Hall effect) for air and land applications fly by wire

A connector in military or aerospace applications is a device used to join electrical wires, cables, or circuits securely, ensuring reliable signal and power transmission under harsh conditions.