The RFcore Radar series are FMCW type radar and were developed to detect/track small air targets. The major difference between three models is detection performance. RX32B is fundamental model. RX128B have four times larger radar than RX32B. RX192A have six times larger radar then RX32B. The number of the product name means the number of antenna elements. All have compact and lightweight physical architecture that concentrates all the components required for radar, such as antenna, RF components and radar signal processor, in a small single housing. Transport can be carried in the carrier box and can be easily carried by one person. For installation, you can use a commercially available camera tripod. The weight is about 7.5kg (RX32B) and 15.9kg (RX128B), and the lower connection part is compatible with the tripod connection for the camera. Power supply requires 12VDC (RX32B) and 24VDC power (RX128B and RX192A). When using a battery, it is possible to connect a 12V battery or 24V battery to radars. Usage time may vary depending on the battery capacity. RFCORE recommended the constant power supply. Transfer of Status and BIT information and simple control of the RX32B, RX128B and RX192A are possible with a web browser using the Ethernet connection for authorized users. Using the terminal program provided with the radar, you can view the radar control and detected target information in real time. All RX Radar seriesโ€™ Power Amp and Core Chip were designed using RFcore's own products.

Reinforced & Non-Reinforced Seals

A hallmark of the U.S. economy is its vibrant and innovative services sector. U.S. services are respected globally, opening the door for American companies t...

The SCXMC-SFPDP is a high-speed optical communication card that operates through the XMC interface of the SBC. It is designed to transmit and receive large volumes of data between the SBC and other devices in real time. Unlike Ethernet, which can be difficult to synchronize, the SCXMC-SFPDP uses optical communication with synchronization signals, enabling precise and high-speed data transfer. It offers low response latency (<40 ยตs) and supports four transmit/receive channels at 3.125 Gbps per channel. A device driver program is required for operation, and the Linux driver can be downloaded from Seedcoreโ€™s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system to ensure reliable real-time data transmission between mission-critical subsystems.

The ECL4000 is an LTE outdoor base station developed for the U.S. CBRS market, providing a service radius of several kilometers and enabling seamless private LTE network service.

Our products include latches, hinges, keepers and hold open rods.

The beginning of the mission given to ammunition The mission of all ammunition begins with the fuse. We are developing and mass-producing fuses based on our many years of experience in developing and mass-producing various fuses to meet the needs of users, including electronic timed fuses, mechanical fuses, and training fuses. Completion of mission given to ammunition Warheads such as penetrating warheads for penetrating power, thermobaric warheads using thermal pressure, and dispersion warheads for suppressing local targets play the role of completing the final mission of the ammunition. Korea Defense Industry has many years of experience developing and mass producing such warheads.

Electric motor used to drive the joint (WT axis) of the Explosive Ordnance Disposal (EOD) Robot.