Features ▪ Xilinx Zynq-7000 Series ARM-Cortex-A9 Core ▪ 10/100/1000 Ethernet Interface ▪ General-Purpose Input/Output ▪ SDLC Interface ▪ RS-232 Interface ▪ VPX 3U Form Factor ▪ Wedge lock, Plug-in Design ▪ Customized Rear I/O Pin Map

This fully self-contained pressure test and calibration system combines pressure generation, signal measurement, and loop power to deliver all the convenience of the Druck DPI 610/615, while being half the size, twice as accurate and easy to use. The DPI 611 is the fourth generation of the DPI 600 family, first introduced in 1984. The DPI 600 family revolutionized testing and calibration by providing all the tools for pressure generation and signal measurement in a stand-alone portable package. The DPI 600 soon became the flagship equipment of the industry and today it is simply known as "Druck". Built on a technical legacy and more than 30 years of experience in pressure measurement and calibration, the DPI 611 offers all the convenience and reliability of a true "Druck", while delivering double the performance of a product half its size.

Our products are used for manufacturing interior design components for civil and military aircraft construction. Sandwich structures are used in many areas of an aircraft (storage compartments, interiors, wings) to reduce weight. In order to structurally strengthen the honeycombs or insert them, they often have to be filled during the production process. Typical materials are one- and two-component epoxy resins with a very high proportion of hollow glass spheres. These require extremely gentle handling, as they would otherwise be destroyed, which in turn would result in an increase in density. Common application patterns are beads, circles, full surfaces and egde-filling. The job is often done manually, which results in long production times and high running costs due to material waste. Lack of reproducibility is just as problematic as the health hazard often posed by these media. The ViscoTec solution: Material is continuously fed to the dosing system by removal from a large container. With the help of a robot or axis system, suitable structures can be mapped reliably. A coordinated overall system delivers a dispensing result according to specification, in which operator interaction is reduced to a minimum.

Neustrelitz is located 100 kilometres north of Berlin. Here, DLR receives data from the German radar missions TerraSAR-X and TanDEM-X, the KOMPSAT satellites of the Korean Aerospace Research Institute (KARI), the European Sentinel fleet and the American Landsat series, among others. The multi-antenna and multi-mission configuration of the ground station allows information products to be delivered to customers within minutes after data reception. These include products for national and European authorities for maritime safety, such as wind and sea state estimates, ice classification, ship navigation through ice-covered waters, detection of navigation irregularities or oil spills as well as the space weather. The Neustrelitz ground station offers data reception in the S, X, and Ka bands as well as data uplink in the S and X bands.

Depending on the applications of our customers we offer a very wide range of solutions with liquid and / or gaseous fluids in a very wide and varied spectrum of pressure, flow and other characteristics. Liquids: Industrial grade oils (ISO VG type) with more complex oils like SKYDROL ® and other synthetic oils Water whether ...

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

The Sparrow-HD is a cutting-edge, low-SWaP 5μm MWIR detector module engineered to meet the stringent demands of the defense wide distribution market. Its innovative design ensures exceptional performance while minimizing size, weight and power consumption, making it a game-changer in the industry. Sparrow-HD is based on two mature sensing material technologies: • XBn with 4.2μm cut-off, operating at 150K and enabling minimal power consumption • Hot Full-Mid-Wave (HFM) with 4.85μm cut-off, operating at 120K and supporting up to 200Hz

This KF-21 fighter jet model is produced using advanced SLA (Stereolithography) additive manufacturing technology, providing both intricate detail and structural precision. Manufactured with industrial-grade ABS material, the model benefits from our fleet of six SLA machines, ensuring consistent quality and scalability for various production demands. Our in-house post-processing team delivers a wide range of finishing options, including custom color applications tailored to client specifications. Our company’s origins are rooted in expert prototype fabrication, and we have since evolved into a leader in additive manufacturing technologies. We support OEM production and prototype mock-up projects for diverse clients, building a reputation for technical excellence and collaborative development. The KF-21 model highlights our capabilities in precision model making, turning innovative designs into high-quality finished products.