The CAS-500(Compact Advanced Satellite), phase #1 project is the project in which KAI aims to develop a CAS500-1 by operating a joint design team with Korea Aerospace Research Institute(KARI) and to transfer the government’s satellite development technology to the industries. Then, KAI initiates the development of the CAS500-2 project and establish the industry-led development as well as mass-production infrastructure.

Product Description and Features 1. Usable Time: Approximately 4 hours 2. Breathable Coolant: Semi-permanent (reusable) 3. Oxygen cylinders and valves: Inspected by the Korea Gas Safety Corporation (KGS) 4. Materials: Outer fabric and PET material are heat-resistant. 5. Drain Button: A device for removing moisture depending on the usage time. 6. Supply Button: A device that temporarily provides a large amount of oxygen. 7. Facepiece: Includes a manual defrost for long-term use. 8. Electronic Pressure Indicator with IT Technology: Life-Saving Alarm (PASS) function, ambient temperature display, container pressure display, automatic alarm for low pressure (approximately 50 bar), usable time display, battery status display, and NFC-based personnel monitoring system (free software provided). 9. Accessories: Bone conduction communication equipment can be applied.

PROJECTS KSS SONAR System KDX-III SONAR System Wire-Guided Heavyweight Torpedo Harbor Underwater Surveillance System (HUSS) ITEMS Transceiver cabinet assembly

APA-110 is designed to eliminate CO2 emissions with its unique technical characteristics. It can perform the complete service of aircraft at remote parking places with diesel engine and it is also capable to operate from the 50/60Hz, 400V, 3 phase main power supply grid as any electrical GPU, without fuel consumption and with zero operating emissions. The range of different APA configurations with no emissions allow for safer, cleaner and more practical operational conditions for operators and personnel at the location.

Hermetic connectors are essential to maintain system integrity in applications where the reliability and performance of electrical connections is critical, such as gas-tight barriers or high-pressures differentials.

Monitors abnormal engine operation based on digital and analog signals from the aircraft engine. It calculates engine life indices and detects engine malfunctions for generate a Pilot Fault List (PFL), which will stored in memory. When an engine failure is detected, it provides warning for display on the Central Maintenance Panel (CMP). Developed as a replacement for obsolete, achieving 60% cost competitiveness compared to equivalent products. - x1 MIL-STD-1553B - x16 Discrete Inout - x14 Discrete Output - x3 Analog Input - x1 RS-232 - Size: 283 x 265 x 89 (mm) - Weight : 4.1Kg - Environment : MIL-STD-810G - EMI/EMC : MIL-STD-461G - Power : MIL-STD-704F (28VDC, 25W)

The NIDV supports its members in both national and international markets in as many ways as possible. From participation in international projects, international trade fair visits to programmes with government support. You can find more information about these initiatives below.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.