CarboNIX NEO is an off-the-shelf separation system available in 8", 15", and 24“, 31.6” and 38.81” sizes. It is scalable to any custom diameter for satellites upwards of 1000 kg. While NEO uses the same lock mechanism and pusher arm subsystems as CarboNIX, NEO employs a new clamp ring system which is stronger, stiffer, can withstand higher loads and launch heavier spacecraft than any other separation system on the market.

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

The R10s is a reconnaissance and surveillance drone capable of conducting up to two hours of mission flight, transmitting real-time information such as target location and scale to the ground control system. Based on the company’s innovative vertical take-off and landing (VTOL) platform “Bluebird,” the R10s is equipped with EO/IR optical sensors and a laser range finder for advanced target detection. Upon receiving mission orders, the R10s takes off vertically, transitions to fixed-wing flight, and proceeds to the designated area. Its onboard cameras and sensors identify and track targets, relaying precise coordinates to the ground control system. With modular wing replacement, the R10s can be configured for extended endurance of around two hours or for high-speed maneuverability, ensuring optimal adaptability and mission effectiveness across diverse operational scenarios.

Counter-Drone System Planning & Optimization, Quantitative, Objective-Based Operational Performance Analysis & Management for Critical and Contested Areas

Type : Radial (3P) Size(Ø, mm) : 82 × 58 Weight(kg) : 0.55 N. Speed(rpm) : 6,200 N. Torque(Nm) : 2 N. Power(kW) : 1.3

It is an UAV recovery system that lands a fixed-wing UAV even in mountainous terrain where there is no sufficient runway for landing. Similar to the arresting hook method used to land an aircraft on an aircraft carrier, the UAV is caught by a pendant and braked, and a net is also added in case of an emergency.

L14F type liquid level switches

Ekinox Micro combines a high-performance MEMS inertial sensor with quad-constellation, multi- frequency dual-antenna GNSS receiver to provide unmatched accuracy even in the most challenging applications. Designed to operate in the harshest conditions, Ekinox Micro is military standard compliant, making it the ideal choice for any mission critical application.