Micro-D Twinax Connectors (MDTX) offer Twinax blindmate assemblies fitted into a low-profile metalized Micro-D style shell, high speed signalling capable of 100 Ohm differential pair matched impedance, maximum space utilization, ultra miniature size and high vibration capability, extremely light weight and modular with true signal integrity.

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m  In cases where a single PC cannot handle large amounts of image data, it becomes necessary to duplicate the image and use multiple PCs for processing. A splitter is required in such scenarios.  The CLS-30T2S amplifies and transmits image signals from a single camera to up to two PCs, supporting Base/Medium/Full configurations (10 Taps supported).  The Master side transmits RS232 and CC1~4 signals, while the Slave side replicates and transmits image signals only.

Our LiDAR uses a custom-designed laser that separates 1064 nm and 532 nm wavelengths from a single source, with two dedicated receivers capturing each set of data independently. Inside the system, the linear laser beam is refracted at a 10-degree angle through a prism to enable circular scanning. An RF module is also integrated for real-time equipment status monitoring. From circuit board design to component selection, every part of this system was developed in-house by multiple institutions. As a result, we have successfully eliminated reliance on foreign technology.

We provide advanced Laser-wire Directed Energy Deposition (LW-DED) 3D printing service. Our capabilities include processing various aerospace-grade materials including titanium, niobium, and other specialized alloys, with unlimited scalability for critical aerospace component production and prototyping.

The IMX-5™ includes Attitude Heading Reference System (AHRS) sensor fusion to estimate roll, pitch, and heading. Adding GNSS input to the IMX-5 enables onboard Inertial Navigation System (INS) sensor fusion for roll, pitch, heading, velocity, and position. Features Tactical Grade IMU Gyro: 1.5 °/hr Bias Instability, 0.16 °/√hr ARW Accel: 19 µg Bias Instability, 0.02 m/s/√hr VRW 0.04° Dynamic Roll/Pitch 0.13° Dynamic Heading Surface Mount Reflowable (PCB Module) Fast Integration with SDK and Example Software Data Logging (SDK and Application Software)

Low noise in Ultra broadband range (kHz~6GHz or 1GHz~18GHz) Now price, short delivery, Good technical service compared with global maker.

TMM-238 is developed and designed for use in operator display for Militray systems. It has 1920 x 1080 pixels visible resolution, which is designed and tailored for use in operator display for Militray systems • 23.8”Inch display, 16:9 / 1920 x 1080 Resolution • HDMI, DP, RGB, input • Full Range Digital Dimming Control • 6 Key Membrane Switch • Power range : DC 24V Input • LCD PANEL backlight unit : LCD Backlight units

The UHF-band TRX module features transmit diversity, allowing selection between two transmit ports and providing an output power of at least 1 W. It includes a gain control function for transmission and an internal local oscillator for IF-to-UHF upconversion. Transmit functions also include ALC (Automatic Level Control) and over-temperature protection. On the receive side, the module selects one of two input channels and performs downconversion. It supports AGC (Automatic Gain Control) with a response time of 80 µs, enabling real-time gain adjustment based on input signal level. The dynamic range of the receive input spans from -100 dBm to -20 dBm, and the noise figure is 5.0 dB or less. Both transmit and receive paths include built-in path self-test functions.