The AMT-206-1 composite tail rotor blade is a direct replacement for Bell 206A and 206B series helicopter tail rotor blades. Now fitted with a new style of feathering bearings manufactured by KAMATICS. These bearings provide a longer life expectancy, with a patented lining that provides lighter pedal loads and a higher level of chemical resistance, compared to that of the standard fabric Teflon-lined bearings. The AMT-206-1 tail rotor blade has a non-symmetrical airfoil section and incorporates a swept tip. The T/R Blade is primarily fabricated from uni-directional Graphite (carbon fiber) and Aramid (Kevlar™) continuous fibers suspended in an epoxy matrix and is fitted with a nickel abrasion strip on the leading edge. The abrasion strip is bonded on using a urethane adhesive. The AMT-206-1 composite tail rotor blades have a 30% cost advantage, twice the lifespan, higher strength and thrust, and a substantial noise reduction, making them safer and ideal for helicopter operators flying in noise-sensitive areas like national parks and built-up areas.

Interconnect Wire Harness and Cable Assemblies are the connectivity backbone of electronic systems. Fabricated in a factory setting, build-to-print wire harness assemblies enable the OEM manufacturer to reduce the time and expense of in situ interconnection of electronic devices used in complex air, sea, land and space applications.

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

Remote Controlled Weapon Station for 12.7mm & 7.62mm machine guns.

This EGR-Cooler prototype, developed in collaboration with Hyundai Motor Company, was fabricated using EOS Stainless Steel 316L, renowned for its excellent corrosion resistance and mechanical properties in demanding automotive applications. The part was additively manufactured over a period of 64 hours, demonstrating the advanced capabilities of metal 3D printing for precision and reliability. Unlike conventional designs, this innovative component integrates 14 separate parts into a single, unified structure, greatly simplifying assembly while enhancing operational efficiency. The implementation of a Triply Periodic Minimal Surface (TPMS) structure within the cooler significantly improves heat exchange performance and enables substantial weight reduction, meeting next-generation thermal management requirements. Partners Lab stands as a leader in Korean additive manufacturing technology, offering cutting-edge capabilities in OEM production and collaborative technical development for various industrial sectors. This EGR-Cooler, designed by nTopology, exemplifies our engineering expertise and commitment to delivering high-performance thermal products for automotive and beyond.

Quadro Versa expands the capabilities of Exolaunch's microsatellite separation systems with a four-point offering tailored to satellites weighing up to 1000 kg and flying on SpaceX Rideshare plates. Versa has been designed for compatibility with the SpaceX four-point interfaces, and it is easily scalable to any size from 24”x24” up to 40”x40”. Larger satellites over 1000 kg and with larger footprints are also served by Versa, which offers unrivaled strength, stiffness and reliability for four-point satellites of any size.

APA-110 is designed to eliminate CO2 emissions with its unique technical characteristics. It can perform the complete service of aircraft at remote parking places with diesel engine and it is also capable to operate from the 50/60Hz, 400V, 3 phase main power supply grid as any electrical GPU, without fuel consumption and with zero operating emissions. The range of different APA configurations with no emissions allow for safer, cleaner and more practical operational conditions for operators and personnel at the location.

The Ultra-Light Hydrogen Module Pack provides a high-efficiency, lightweight hydrogen energy solution optimized for aerial applications. It integrates fuel storage, power management, and safety systems in a compact form, enabling long-endurance flight while maintaining exceptional energy-to-weight performance.