Ultra-High Accuracy MEMS Certus Evo features some of the highest accuracy MEMS accelerometers and gyroscopes currently available. Certus Evo’s inertial performance exceeds some FOG IMUs and is up to 100x smaller and 10x cheaper. Certus Evo is put through Advanced Navigation’s intensive calibration process to provide consistently accurate data over an extended temperature range of -40°C to 85°C. AI-Based Algorithm Certus Evo features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. Dual Antenna RTK GNSS Certus Evo contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus Evo contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi Protocol Support Certus Evo features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.

STANAG 4695 & GOSSRA* * GENERIC OPEN SOLDIER SYSTEM REFERENCE ARCHITECTURE compatible with Nett Warrior BREAK-AWAY CONNECTOR

The Harxon JH001 and JH003 antennas are purpose-built for UAVs operating in environments with jamming and spoofying, offering superior anti-jamming capabilities far beyond ordionary helix antennas. Leveraging advanced beamforming technology and pre-multiple filtering, these antennas significantly enhance signal quality by effectively suppressing out-of-band noise and mitigating multipath interference. This ensures robust, high-precision centimeter-level positioning, making them ideal for critical UAV applications.

Power Supply 0...80V 0...510A 15000W

SBC (single board computer) for VMEbus based on TI DaVinci CPU, ARM Cortex-A8 1.2GHz, C674x 1GHz DSP, SGX530 3D Graphics Engine, DDR3 memory, Giga Ethernet 2 port, video input/output 5 port, SATA-2 2.5" SDD This is a built-in SBC board for video processing. Application field: image processing system Shipboard EO video system Video encoder/decoder system Multi-channel video storage/distribution system Characteristic: VME type multi-channel video recorder Supports 4-channel NTSC/PAL video compression (H.264) Supports 4-channel audio recording Supports local video and audio playback Supports network RTSP function Supports Ethernet-based GUI control

CBOL Corporation is pleased to highlight our role as the producer of the H-250/U handset and our role in the supply chain, as we actively contribute to fulfilling the needs of a respected U.S. military OEM through having passed its rigorous qualification requirements. We take great pride in our ability to meet our valued partners' evolving demands in ensuring national security and abroad.

The SC-SBCRTM, a Seedcore Co., Ltd representative product, is a backplane transmission module that performs the I/O function of the SBC627. When the SBC627 board is plugged into the motherboard(Backplane) in front of the Chassis, you can extend the I/O function of the board by plugging the SC-SBCRTM board into the back of the Backplane.

The NSP-5 is an all-weather, multimode, Ku-band radar designed to fly on Group 3-4 Unmanned Airborne Systems (UAS). Its low-Size, Weight, and Power (SWaP) design means ample room for other onboard sensors, such as Electro-Optical and Infrared (EO/IR) cameras. This means users can understand the bigger picture. The NSP-5 is capable of performing spot and stripmap Synthetic Aperture Radar (SAR) and Magnitude Change Detection (MCD), as well as Moving Target Indication (MTI) collections in a variety of maritime and land environments in all weather conditions. This includes smoke, fog and other obscurations where the operators do not have a clear view of the terrain below them. The NSP-5 has a proven track record of reliability and has a recommended maintenance interval of 2,000 hours. Additionally, the modular design makes the NSP-5 easy to integrate onto most platforms.