Designed to support U.S. DoD modernization strategies, REDCOM Sigma is a complete software-based Command & Control solution with voice, video, chat, and conferencing. REDCOM Sigma® increases the warfighter’s operational flexibility while reducing size, weight, and power (SWaP) requirements at the tactical edge. REDCOM Sigma is based on open standards with a focus on interoperability, flexibility, and ease of use, and is listed on the DoDIN Approved Products List (APL). REDCOM Sigma was selected by the U.S. Army’s Program Executive Office Command, Control Communications-Tactical for network modernization at the tactical edge. Sigma is being deployed to multiple programs within the U.S. Army at the battalion level and below.

Featuring an ultra-compact package of less than 5 cubic inches, the TAC-440 delivers 1°/hour gyro bias with 1 mg accelerometer bias stability and very low 0.05°/√hour angle random walk (ARW) over wide temperature ranges. The breakthrough performance of the TAC-440 IMU is based on a EMCORE’s proven quartz MEMS inertial sensor technology. EMCORE’s quartz technology enables repeatable, high-volume production of precisely machined sensor structures combined with the inherent large signal output and thermal stability of quartz materials. The TAC-440 is a compact IMU constructed with EMCORE’s latest generation quartz gyros, quartz accelerometers, and high-speed signal processing to achieve outstanding precision performance. The TAC-440 IMU is designed for demanding, mission-critical, rugged environments. The solid-state quartz sensors and hermetically sealed IMU construction provide reliable MTBF. Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection make the TAC-440 IMU easy to use in a wide range of higher order integrated system applications.

Large mirrors are crucial in various optical systems, particularly long-range multi-spectral setups for defense, surveillance, and commercial use, like UAV optics and agricultural temperature monitoring. Aerospace applications, such as satellites and telescopes, are common. These mirrors come in different shapes and materials, including Al, Si, Ge, and Cu, spanning visible, UV, and IR spectrums. By using advanced CNC grinding, polishing, and diamond turning we provide precise surface forms, with tight tolerances, and multispectral performance. Our mirrors, up to 700mm in diameter, provide impressive specifications: 0.05% radius tolerance, less than 0.5Fr P-V irregularities, 0.1Fr RMS at 0.633μ, and sub-40Å RMS roughness. MKS Ophir's proprietary coatings enhance spectral performance and surface durability. Contact us to set a meeting at ADEX Seoul

The MIL-DTL-5015 series of connectors were developed as military standard connectors and applied to various military equipment, it is also used in general industries, medical care, electric vehicles, robots and automation facilities based on its high durability and reliability. This series is threaded coupling and the connection between the contact and the wire is based on soldering. It can be used compatibly with third-party products of the same standard since it is produced according to military standards.

Official Korean Distributor and Licensee of Parker Velcon, offering industrial filter systems and filter cartridges Filter vessels and elements (cartridges): Filter/separator vessel and cartridge, Moisture-absorbing Aquacon filter vessels and cartridges; Micronic filter vessels and cartridges (0.5 Micron to 25 micron), Natural Gas filter vessels and cartridges; etc.

Device for checking turret operation, turret fan control, air conditioning control, and status.

llumia ENGAGE facilitates open-ended training conversations using flexible AI agents to help practice 21st-century skills, decision-making and communication across multiple platforms.

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).