CoaXPress enables bidirectional transmission of data transfer, camera control, power supply (PoCXP), and triggering over a single coaxial cable. This product supports the following transmission standards. Designation Bit Rate ========== ======== CXP-1 1.250 Gbps CXP-2 2.500 Gbps CXP-3 3.125 Gbps CXP-5 5.000 Gbps CXP-6 6.250 Gbps CXP-12 12.500 Gbps The CXR-4C amplifies and transmits image signals from 1/2/4-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.  4 CH x 1 Camera Configuration  2 CH x 2 Camera Configuration  1 CH x 4 Camera Configuration  2 CH + 1CH Camera Configuration

In order to guarantee the quality requested by customer, we have been implementing thorough quality control based on ISO9001, ISO14001, TSI6949, the National Defense Quality Management System and SQ processor.

AI Navigation Algorithm Certus features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS Certus contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Dual Antenna RTK GNSS Certus contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi-Protocol Support Certus features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.

The SDI170 IMU is designed for demanding, mission-critical, rugged environments and ideal for continuous use applications with no wear-out components, highly linear accelerometer performance and longer life compared to competing alternatives. It is constructed with EMCORE’s latest generation quartz gyros, quartz accelerometers, and high-speed signal processing to achieve outstanding precision performance. The solid-state quartz sensors and hermetically sealed IMU construction provide reliable MTBF and a 20-year operating and storage life. Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection and flexible input power compatibility make the SDI170 IMU easy to use in a wide range of higher-order integrated commercial and defense system applications.

Fast and Intuitive Quality Inspection With precise AR overlay technology, deviations between 3D design data and real-world objects can be identified instantly. This enables fast and accurate quality inspections on the spot. Optimized and Lightweight 3D File Processing Supports the four most popular 3D file formats: FBX, GLTF, OBJ, and STL. Lightweight processing ensures faster matching and smoother inspection workflows. From Inspection to Report — All in One Inspection results can be recorded and documented with image captures, drawings, and notes. Final reports can be exported in PDF, XLS, or CSV formats, making them easy to share and manage.

The Crane stands as a state-of-the-art Mid-Wave Infrared (MWIR) detector. This device features a 5-megapixel resolution in a 2560×2048 format with a fine 5μm pitch. It is based on SCD's established XBn technology or Hot Full Midwave (HFM) and incorporates a digital readout circuit developed using an advanced CMOS process. The High Operating Temperature (HOT) Focal Plane Array (FPA) functions efficiently at 150K or 120K, enabling a large-format detector that excels in image quality while maintaining a relatively compact size, weight, and power consumption. SCD continues to lead in innovation.

The FOR-10T/R supports Base configurations (including 10 Taps) and enables long-distance transmission of image signals via optical fiber, along with RS232 control signals and CC1~4 trigger signals. These signals are transmitted to the PC. This product supports transmission distances of up to 2 km, and by replacing the optical module, even longer distances can be achieved.  Fully supports the Camera Link interface (Area/Line Scan).  Supports Base (including 10 Taps) configurations (CC1~4, RS232, 10 Ports (Taps), LVAL, DVAL, FVAL).  Supports pixel frequency from 20 to 85 MHz.  Maximum transmission distance: 2000 m.  Enables lossless transmission.  Supports all external full-duplex RS232 communication speeds on a single port.  Features a locking DC power jack (Molex).  Camera link Connector Type : SDR connector.

Vector AI provides real-time, high-resolution ISR data with minimal signature and a modular architecture that allows it to adapt to various mission profiles. With thousands of operational hours, including in active combat in the Ukraine, Vector AI is trusted by defence and security forces globally. Key Features: Up to 180 minutes of flight time Silent electric propulsion Fixed-wing performance with VTOL convenience AI-powered onboard computing and object recognition Open systems architecture for flexible payload integration Seamless switch to multicopter configuration using shared hardware