The operation of robotic inspection systems in an industrial environment requires a reliable control station. The second generation integrated control station -ICS 2- gives operators an all-in-one tool. Supplied in a rugged hardshell case (Pelicase®), embedded components such as a 21.5-inch touchscreen, high-performance PC or joystick can be selected according to industry standards. It also boasts a 10-year spare parts guarantee as well as extreme robustness and reliability even in harsh environments. Simplicity and ease of operation were key when developing ICS 2. The operator connects the robotic platform with one single cable and using the integrated joystick, operation is simple and self-explanatory.

- Specialized in manufacturing Miniture ball screw - Shaft diameter 4mm~20mm - Precision grade C0~C7 - Shaft length differs depending on material, size, accuracy of shaft - Efficiency 90% or higher

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

LLC-4000 is a cutting-edge 4K low-latency video encoder/decoder purpose-built for tactical operations, reconnaissance, and situational awareness in demanding environments. It delivers reliable real-time video transmission over narrow-bandwidth satellite links and tactical radio systems, enabling uninterrupted communication during critical missions. Engineered with a compact form factor and advanced compression technology, the LLC-4000 is well-suited for remote and mobile deployments where bandwidth is limited. Proven in operational use, the system has been successfully deployed by units of the Japan Ground Self-Defence Force, including amphibious rapid deployment and communications brigades, supporting a wide range of military field operations.

The SCXMC-AURORA is one of Seedcore’s flagship products, designed for high-speed optical data communication through an XMC interface. Utilizing the Xilinx Aurora 64B/66B protocol, it supports four transmit/receive channels, each operating at 10.3125 Gbps via integrated optical transceivers. A device driver program is required for operation, and the Linux driver can be downloaded from the product information page on Seedcore’s website. This module is deployed in the M-SAM air defense system, providing reliable and high-speed data transfer between mission-critical embedded components.

다양한 환경에서 적용가능한 안테나들을 개발하여 육,해,공을 아우르는 전장 환경에 맞게 공급, 군의 통신전력 증대에 기여하고 있습니다.

The LSH rack and panel high power connector series from Smiths Interconnect is utilized across many different market segments including aerospace, automotive, industrial, test and measurement, and mass transit. The foundation upon which the LSH is built is the leading-edge Hypertac® hyperboloid contact technology. This world class interconnect technology ensures LSH connectors are immune to shock, vibration and fretting. In addition, they feature low insertion and extraction forces that are a catalyst for easy mating relative to their contact size. The LSH Series delivers customers a contact life that can be maintained for up to 100,000 mating cycles and at an extremely low cost of ownership.

MTS-3060A SmartCan is a Universal O-Level Armament Test Set