Developed and manufactured by MPS Microsystems based on customer specifications, this lens actuator forms an essential component of a laser guidance system for unmanned flying objects. It enables 2 lens groups to be displaced individually over a total range of 48 mm and makes it possible to focus a laser over a distance of several kilometres. The main technical difficulty inherent to this actuator lies in meeting very stringent requirements for alignment between the two lens groups (< 10 µm) and in maintaining a very small tilt of the lenses over their entire stroke (lateral deviation < 2 µm). The key part making it possible to ensure such specifications is a frame machined by milling from an aluminium block, into which the 2 drive systems are fastened. These systems each consist of a Ø16 mm brushless motor and a Ø4 mm ball screw with an axial play of less than 5 µm. Backlash-free and frictionless sliding of the lens holders is ensured by standard L306 linear ball bearings manufactured by MPS Microsystems.

The Bombardier Global 8000 aircraft, set to enter into service in the second half of 2025, is the fastest and farthest flying business jet in the industry. The Global 8000 aircraft can be outfitted with secure communications, navigation and self-protection systems.

Our MDB1200WP industrial actuator offers a contactless magnetic encoder, brushless motor and IP67-certified water & dust-proof protection, making it suitable for many demanding industrial applications. This 30mm powerhouse delivers over 1500 oz-inches of torque at 7.4V and features an aluminum alloy case to dissipate heat, two ball bearings and five hardened steel gears, and PWM control protocol. Program numerous parameters to optimize the installation and performance for your industrial applications. #UAV #UAS #UGV #UUV #USV

It can carry and deliver payloads of 5 to 10 kilograms, making it suitable for commercial and industrial logistics. The drone has been successfully tested in extreme environments, ensuring stable performance under harsh conditions. With its proven capability, PELICAN expands the possibilities of drone-based delivery solutions in both urban and remote areas.

Supports non-destructive inspection of aircraft composite skin structures and is composed of a piezoelectric layer sensor, data acquisition equipment, and damage analysis software. Utilizes piezoelectric sensors to generate Lamb-wave and acquire signals, collecting data to accurately detect and assess composite damage. Visualizes inspection results on display such as damage location, size and index. - POD Accuracy: 1 inch 90% or more - POD Precision : Position error within 30 mm - 64 channels / 230 path reference detection time within 10 minutes - Sensor : Resonance resistance less than 400kΩ - Sensor : MIL-STD-810G - Sensor : RTCA DO-160 Section 23.0 - DAQ : x128 Piezoelectric sensor interface

The VPX3-C11 which provides a full 3U OpenVPX(VITA 65) is a Single Board Computer(SBC) that combines the power, versatility, cost-effectiveness of the 11th generation Intel Xeon W processor and RM590E PCH chipset with the reliability. VPX3-C11 is based on the Intel Xeon W- 11865MLE CPU that has 8 cores running at max 4.5GHz and providing 32Gbytes of high-bandwidth DDR4 SDRAM. Intel Xeon processor includes an integrated Intel UHD Graphics 11th Gen(32 EU) graphics engine, providing discrete GPU performance with OpenGL for graphicsintensive applications. For storage application VPX3-C11 provides the built-in 80GB SLC NVMe SSD solution via PCIe x4 lanes as well as the external SATA expansion through VPX site. The VPX3-C11 satisfies the demanding applications ranging from tactical aircraft to armoured vehicles to rugged industrial systems, with its rich complement of features and I/O including Intel Graphics, Integrated Platform Management Interface, Gigabit Ethernet, DIO, Serial channels, USB ports and more. Especially VPX3-C11 was designed to keep the pin compatibility with VPX3-C11, previous 6th Generation model in terms of I/O interface signal arrangement.

The L-band 8-channel filter bank receiver module is equipped with eight internal filter bank channels, enabling improved reception performance by isolating specific sub-bands within the receive frequency range. A 100W limiter at the input stage protects the receiver from high-power signals, and the module offers a low noise figure of 3.0 dB or less. The input P1dB for the receiver is -20 dBm, and the module features a built-in path self-test function.