The JW22992 connector was developed for the purpose of high-power transmission with demanding military standards and exhibits IP67-grade water and dust resistance. It is also designed in the range of 40 to 200 amps and is used for high-power military and industrial equipment that requires the highest reliability. Key Features: High Power Transmission, Designed to handle high currents, Robust construction It provides a stable connection with five key grooves and two-line screws.

The Improved Fire Control System (IFCS) PNU / Universal Fire Control System (UFCS) UPNU family represents a true state-of-the-art system approach. Its design features permit ready adaptation and/or optimization to any current or future weapon system or sensor requiring precision pointing and positioning. The PNU / UPNU and its variants point the way for the future direction of the land navigation systems. Utilizing advanced sensors, electronics, software and aiding (GPS and odometer), the PNU / UPNU family delivers precisely what the Army of tomorrow needs — a system designed to remain operationally effective and affordable to support well into the future. Features High-performance RLG-34 ring laser gyros Common architecture and components (Paladin, PIM, Firefinder, IPADS) Embedded 12-channel Selective Availability Anti-Spoofing Module (SAASM) Impervious to jamming (inertial mode) Resistant to jamming (GPS-aided mode) Combat-proven Embedded Built-In Test (BIT) High reliability MTBF, low mean time to repair (MTTR) No periodic calibration required Applications Multiple Launch Rocket System (MLRS) High-Mobility Artillery Rocket System (HIMARS) Pointing and position location

This EGR-Cooler prototype, developed in collaboration with Hyundai Motor Company, was fabricated using EOS Stainless Steel 316L, renowned for its excellent corrosion resistance and mechanical properties in demanding automotive applications. The part was additively manufactured over a period of 64 hours, demonstrating the advanced capabilities of metal 3D printing for precision and reliability. Unlike conventional designs, this innovative component integrates 14 separate parts into a single, unified structure, greatly simplifying assembly while enhancing operational efficiency. The implementation of a Triply Periodic Minimal Surface (TPMS) structure within the cooler significantly improves heat exchange performance and enables substantial weight reduction, meeting next-generation thermal management requirements. Partners Lab stands as a leader in Korean additive manufacturing technology, offering cutting-edge capabilities in OEM production and collaborative technical development for various industrial sectors. This EGR-Cooler, designed by nTopology, exemplifies our engineering expertise and commitment to delivering high-performance thermal products for automotive and beyond.

Threaded bushing enables localized reinforcement of and attachment to panel structure. Supplied with disposable installation fixture. 1.25" Flange Diameter. SIZES: Imperial fine thread sizes from 10-32 (.190"-32) to 3/8-24 (.375"-24), Imperial coarse thread sizes from 8-32 (.164"-32) to 3/8-16 (.375"-16), and metric thread sizes from M5 to M8. 1.25" Flange Diameter. Grip lengths from 0.25" to 1.50". MATERIALS: Aluminum, 300 Series Stainless Steel, A-286 Stainless Steel, 316 Stainless Steel, and Titanium. Optional epoxy primer. FEATURES: Standard 1.25" diameter flange, 0.75" x 1.25" trimmed flange optional.

Product Specifications: Reduce weight and achieve high durability by applying high-strength materials Customer Mercedes-Benz in Germany

A gas container that stores ultra-high-purity nitrogen gas at high pressure and supplies it for seeker cooling when needed. It is designed to prevent gas loss even during long-term storage.

Wing shells, side shells and fuselage sections are usually made of carbon fibre composites and glued together during the production process. With many components, a groove or an open edge remains after the bonding process, which must be filled or sealed. A modified two-component epoxy resin is often mixed and then applied manually. This often entails long production times and complex quality controls. Equally high material costs due to the processing of materials from cartridges. ViscoTec defies short pot life and materials that are difficult to handle: Thanks to a coherent overall system from material removal to material application, this process can be automated. The two components are taken separately from cartridges, hobbocks or drums and fed via hose lines to a two-component dosing system. Only at the very end of the process they are mixed in a static mixing tube and applied to the substrate (e.g. via a nozzle). The process is controlled and monitored by pressure sensors.

Plane Windows are used as substrates for a variety of applications, such as laser window, output couplers, beamsplitters, beam combiners, mirrors, dichroic filters and plate polarizers. Considerations in selecting window substrates include transmission range, absorption coefficient, incident laser power density and environmental factors such as pressure, temperature, moisture, abrasion and corrosion. Plane Windows listed under UV / VIS / NIR substrates are specified for applications involving coating wavelengths 193nm ≤ λ〈2.0 μm. Units for these substrates are given in mm. Plane Windows listed under IR substrates are specified for applications involving coating wavelengths λ≥ 2.0 μm. Units for these substrates are given in inches. Refer to the THIN FILM COATINGS section for information on coatings that can be applied to these substrates.