The mighty Hitec SG33BLT Series servo actuators operate on DroneCAN (formerly UAVCAN), CAN 2.0 A/B, RS485, PWM and TTL command protocols, and feature brushless motors, magnetic encoders, and hardened steel gears. They are also environmentally sealed with an IP67 waterproof case rating. The SG33BLT Series was initially developed for the automotive industry requiring minimal support equipment and wiring, saving unnecessary installation complexity, cost and weight. This same functionality is now enjoying widespread adoption of CAN and DroneCAN systems within the UAV environment. With options for both 9~15-volt and 18~32-volt operations, and DB9SUB, Circular, & Gland Cable connectivity, the SG33BLT Actuator Series is sure to have a solution for your needs. #UAV #UAS #UAM #UGV #UUV #USV

< Frequency Range > ● 500 ~ 2700 MHz < Output Power (W) > ● 100 < Gain (db) > ● 50 < Power Supply (V) > ● 32.5 < Current (A) > ● 14 < Dimension > ● 208.3 x 91.4 x 26.9 (mm)

The ENM2000 is a vehicle-mounted mmWave base station integrating CU/DU/RU, working in conjunction with the EPNR4000, 5G Core, and application server. It enables ultra-broadband data communication that Sub-6GHz base stations cannot provide.

o Detection substances Nerve: GA, GB, GD, GF, VX Blister: HD, HN3, L o Detection concentration G : ≤ 0.1㎎/㎥, ≤ 30 s VX : ≤ 0.04㎎/㎥, ≤ 30 s Blisters: ≤ 2.0mg/㎥, ≤ 30 s o Size: 185×165×285 mm o Weight: 4.5 kg or less

Developed as Korea’s first hydrogen-and-battery hybrid propulsion system, this next-generation eco-friendly aircraft uses electric batteries for take-off and hydrogen fuel cells for cruise flight, achieving a new standard in sustainable aviation. Recognized as a world-first intellectual property, this model also became the first hydrogen hybrid Advanced Air Mobility (AAM) aircraft in Korea to receive Special Airworthiness Certification from the Ministry of Land, Infrastructure and Transport in 2024.

Our products are used for manufacturing interior design components for civil and military aircraft construction. Sandwich structures are used in many areas of an aircraft (storage compartments, interiors, wings) to reduce weight. In order to structurally strengthen the honeycombs or insert them, they often have to be filled during the production process. Typical materials are one- and two-component epoxy resins with a very high proportion of hollow glass spheres. These require extremely gentle handling, as they would otherwise be destroyed, which in turn would result in an increase in density. Common application patterns are beads, circles, full surfaces and egde-filling. The job is often done manually, which results in long production times and high running costs due to material waste. Lack of reproducibility is just as problematic as the health hazard often posed by these media. The ViscoTec solution: Material is continuously fed to the dosing system by removal from a large container. With the help of a robot or axis system, suitable structures can be mapped reliably. A coordinated overall system delivers a dispensing result according to specification, in which operator interaction is reduced to a minimum.

ICONYX™ is a high-performance tactical grade Inertial Measurement Unit (IMU) for guidance and control applications. ICONYX™ is designed to meet the most demanding environmental conditions with extreme accuracy and reliability. Proven Technology Safran proposes an IMU based on Hemispherical Resonator Gyroscope the HRG Crystal™. This technology is combat proven for 15 years and is extremely accurate, reliable, and is capable of navigating in the most contested GNSS denied environments. HRG Crystal™ Embedded Thanks to the HRG Crystal™, ICONYX™ surpasses the highest performances of its category while keeping the best in class SWaP (Size, Weight, and Power) characteristics of the market. High performance in demanding environments ICONYX™ includes 3 hemispherical resonator gyroscopes HRG Crystal ™ and 3 closed loop MEMS (Micro Electro Mechanical Systems) accelerometers in a compact package. Both Safran’s gyroscopes and Safran’s accelerometers are technological breakthrough.

Available in operating frequencies from HF to Ku-band and with standard output powers ranging from 2 to 1000 watts. Standards Functions Include: FWD/RVS Detector, Mute, Temperature Monitoring, VSWR Alarm with Protection, Over Temperature Alarm with Protection and Auto-recovery, Over voltage protection, ALC, AGC and Current Monitoring.