HYPER Series offers the original superior performing hyperboloid contact technology designed for use in all applications and in harsh and demanding environments where high reliability and safety are critical. The inherent electrical and mechanical characteristics of the Hypertac® HYPERboloid conTACt ensures unrivalled performance in terms of reliability, number of mating cycles, low contact force and minimal contact resistance. The shape of the contact sleeve is formed by hyperbolically arranged contact wires, which align themselves elastically as contact lines around the pin, providing a number of linear contact paths.

Official Korean Distributor and Licensee of Parker Velcon, offering industrial filter systems and filter cartridges Filter vessels and elements (cartridges): Filter/separator vessel and cartridge, Moisture-absorbing Aquacon filter vessels and cartridges; Micronic filter vessels and cartridges (0.5 Micron to 25 micron), Natural Gas filter vessels and cartridges; etc.

Quadro Versa expands the capabilities of Exolaunch's microsatellite separation systems with a four-point offering tailored to satellites weighing up to 1000 kg and flying on SpaceX Rideshare plates. Versa has been designed for compatibility with the SpaceX four-point interfaces, and it is easily scalable to any size from 24”x24” up to 40”x40”. Larger satellites over 1000 kg and with larger footprints are also served by Versa, which offers unrivaled strength, stiffness and reliability for four-point satellites of any size.

- A red light mounted on the left side of the aircraft to indicate the aircraft's location - A green light mounted on the right side of the aircraft to indicate the aircraft's location - These lights indicate the aircraft's position, flight direction, and attitude - Visible/IR Mode, Steady/Flash Mode - Light Intensity : FAA FAR 29.1391 ~ 29.1395 - SAE ARP 5825A

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

Inserts are used in the aerospace industry in lightweight sandwich panels and are then bonded. The panels can then be screwed or various components can be fastened. However, the manual process has several disadvantages: Enormous expenditure of time for the manual filling of several thousand inserts, high material waste due to relaxation of the material, and high material costs through the use of cartridges. ViscoTec can map the filling process automatically. The dispensing process is absolutely precise. A significant amount of material can thus be saved. In addition, material can be supplied from large containers, which in turn lowers purchase prices. Another important advantage: As a rule, no new specifications have to be made since no changes are made to the actual process.

SJP’s special parts are custom-designed and manufactured to meet unique requirements that standard components cannot fulfill. With our advanced R&D capabilities and state-of-the-art CNC multi-tasking machines, we handle complex geometries, tight tolerances, and special materials with precision. These parts are widely used in medical devices, semiconductor equipment, precision instruments, and aerospace & defense, where reliability and high accuracy are essential. From rapid prototyping to full-scale production, we deliver end-to-end solutions that shorten development cycles and enhance product competitiveness.