Orbit’s TT&C ground stations antenna must function flawlessly in order to provide a narrow beam width link in one-time single opportunity, flight test event. Add this factor to the turbulent weather that is often present at the ground station locations, and you are looking at a formidable hurdle. Orbit provides fixed, transportable, and portable antenna systems that feature auto-track, RSSI-track and GPS track tracking modes, unsurpassed tracking accuracy and durability to deliver the stable connection required for dependable data throughput. Our stabilized T&T antenna systems work in extreme temperature conditions (-40°C to 55°C) and in rough weather, for example, at base stations that are close to the ocean or on high mountain ranges.

The Haigh-Farr family of rugged Blade antennas is available in frequencies ranging from UHF to upper C-band. Since 1972, our blade antennas have a demonstrated reliability of use in high-performance airborne applications. In addition, they are used extensively in ground-based vehicles such as race cars, trucks, tanks, and motorcycles, to name a few. 60XX & 61XX Series: Our 60XX & 61XX Series blade antennas have quasi-uniform null-free hemispherical gain patterns and may be provided in either straight or rounded blade configurations. 60XX and 61XX Series blade antennas are available in standard and high powered versions. With sufficient airflow, our standard blades handle an average power of 25 - 30W CW and our High Powered blades can handle an average power of 80W CW. These blade antennas share a common footprint with varying height. Multiband: Haigh-Farr Multiband blade antennas utilize identical materials and construction as our 60XX & 61XX series blade antennas with additional bandwidth. UHF: Haigh-Farr UHF blade antennas provide coverage down to 380 MHz and up to 470 MHz in two unique form factors. Our 6300-X series of blade antennas utilize identical materials and construction as our 60XX & 61XX series blade antennas in the larger blade structure required at UHF-band. Our P/N’s 16230-XXX and 16400-XXX are low profile, mechanically robust designs that can be custom tuned to meet discrete UHF frequencies, with an option to add thermal protection for high temperature environments.

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

A ground control system that establishes unmanned aerial vehicle missions, controls aircraft and mission equipment, reads image information, and transmits it to higher-level units.

A next-generation Advanced Air Mobility (AAM) aircraft currently under development, designed with a separable upper platform and lower mission module structure. The interchangeable lower modules can be configured for passenger transport, cargo delivery, or reconnaissance missions, offering exceptional operational flexibility across various applications. As a large-scale platform, it embodies the future of modular air mobility, enabling rapid mission conversion, efficient maintenance, and cost-effective operation for both urban and regional air mobility sectors.

Fasteners, tools, metal kits for with commercial and industrial application

L3Harris combines speed, innovation and flawless execution to deliver the best solutions as quickly as possible.

- We have developed a lightweight AAM/UAM seat using composite materials, achieving a weight reduction compared to conventional seats. - A modular design that accommodates various aircraft models allows for customization according to the needs of each customer. - A design compliant with aviation safety regulations, utilizing our existing EASA DOA (Design Organization Approval).