The SCXMC-SFPDP is a high-speed optical communication card that operates through the XMC interface of the SBC. It is designed to transmit and receive large volumes of data between the SBC and other devices in real time. Unlike Ethernet, which can be difficult to synchronize, the SCXMC-SFPDP uses optical communication with synchronization signals, enabling precise and high-speed data transfer. It offers low response latency (<40 µs) and supports four transmit/receive channels at 3.125 Gbps per channel. A device driver program is required for operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system to ensure reliable real-time data transmission between mission-critical subsystems.

Our transport drone is designed for efficient and reliable cargo delivery. With precise and stable flight performance, it supports real-time monitoring of delivery routes and environments through an advanced camera system, ensuring safe and timely operations.

The Bradley A4 features the latest digitized electronics for optimum situational awareness, network connectivity and communication within the Armored Brigade Combat Team. The Bradley A4’s proven durability and commonality of design reduce the logistics burden, while enhancing battlefield performance to meet a variety of mission requirements in close- combat, urban scenarios and open-combat situations.

Survivability – Improvements to the Fire Suppression and IED jammer components further enhance survivability by reducing the likelihood of system detectability and target acquisition by external systems and defeats external threats.

Mobility – System is capable of maximizing its acceleration capabilities due to the increased engine horsepower in order to provide rapid movement of the System in reaction to combat or other adverse situations. Enhanced mobility function provides driver with improved situational awareness and mobility functionality status. Lethality – Leveraging the lethality functionality from its predecessor, the Bradley A4 consists of full ballistic fire control hosted on a new central processing unit, aided dual-target tracking, automatic gun target adjustment, automatic bore sighting and hunter-killer capabilities. The Bushmaster 25mm cannon fires both explosive and armor piercing rounds, while TOW missiles defeat enemy armor. The 7.62mm coaxial machine gun provides high volume fires at close ranges.

Networkability – Integration of improved computing system assets allows housing of more robust software applications in order to provide improved near real-time networking situational awareness to soldiers on both platform variants.

Supportability – Improvements to on-board diagnostics systems provide increased fault detection and isolation capabilities and added interactive electronic manuals enhance maintenance capability.

The semi-automatic ViscoTec mix-on-demand station is already in successful use as a mobile system. For reliable mixing and dosing of two-component materials, in situ. Two-component materials are commonly processed using premix cartridges, hardener rod cartridges or by mixing two components by hand. The disadvantages are obvious: The risk of human error, enormous material waste and high production costs offer every reason for taking the automated route. With ViscoTec filling stations, epoxy resins, polysulfides and polyurethanes can be removed from larger containers and filled on-demand with the exact quantity required. The dosing is volumetric on a component or a filling container. A typical application is dosing in so-called inserts (thread inserts). The compact arrangement of the components on a mobile frame guarantees the operator maximum flexibility. The design as a stationary system has already been implemented several times.

Sponsored] Raytheon Missiles & Defense, a business of the newly formed Raytheon Technologies, is built on a foundation of advanced innovation and excellence...

Glenair offers its connector and connector accessory customers every convenience in the provision of contact termination, shield termination, and backshell-to-connector assembly tooling. We are also proud to offer branded solutions from other well-known tool manufacturers such as Daniels (DMC) crimp tools. From pneumatic Earth-Bond tooling for the rail industry, to fiber optic termination and test equipment, Glenair is your most knowledgeable and reliable source for special-purpose interconnect assembly tooling. Our complete selection of manual shield termination and pneumatic bench-mount banding tools are the most prized in the industry. Only Glenair Band-Master ATS offers an integrated counter to ensure reliable, repeatable banding and calibration.

EMCORE’s SDI170 IMU is designed as a performance-compatible inertial system that is form, fit, and functional with a legacy RLG-based IMU product, but with superior overall performance, versatility, and a significantly higher MTBF (Mean Time Before Failure) rating over ruggedized environments. The tactical performance of the SDI170 IMU is based on EMCORE’s mature, proven, dependable and accurate quartz MEMS inertial sensor technology in our SDI500 tactical-grade IMU. EMCORE’s quartz technology enables repeatable high-volume production of precisely machined sensor structures combined with the inherent large signal output and thermal stability of quartz materials. The SDI170 IMU is designed for demanding, mission-critical, rugged environments and ideal for continuous use applications with no wear-out components, highly linear accelerometer performance and longer life compared to competing alternatives. It is constructed with EMCORE’s latest generation quartz gyros, quartz accelerometers, and high-speed signal processing to achieve outstanding precision performance. The solid-state quartz sensors and hermetically sealed IMU construction provide reliable MTBF and a 20-year operating and storage life. Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection and flexible input power compatibility make the SDI170 IMU easy to use in a wide range of higher-order integrated commercial and defense system applications.

The new TAC-450-320/340/360 inertial measurement unit (IMU) is a dependable, tactical-grade, non-ITAR inertial system that’s also affordable. It features EMCORE’s exclusive photonic integrated chip (PIC) technology for robust performance and survivability and offers inertial-grade MEMS accelerometers for outstanding FOG-based inertial performance as affordable as MEMS alternatives. The TAC-450-320/340/360 IMU is ideal for autonomous and unmanned commercial and defense applications, mobile mapping and surveying systems, targeting and pointing systems, and guidance and positioning. Highlights Compact and lightweight with high-performance Offered with 16g inertial-grade MEMS accelerometer Robust performance with high bandwidth Technology Details Photonic Integrated Chip Technology EMCORE’s photonic integrated chip (PIC) technology reimagines FOG technology by replacing individual fiber components with an innovative integrated planar optic chip. This results in a FOG with PIC Inside™ that’s reliable and robust. With three of these integrated photonic gyros at its core, the TAC-450-320/340/360 IMU provides the safe, accurate performance autonomous platforms demand. State-of-the-art Electronics EMCORE’s Dual Core DSP electronics with ARM processor require less power for extended product life and offer higher speed with integrated multi-channel processing. Low-loss optical circuits use less light for greater efficiency. Feature Options Developer’s Kit for Rapid Integration The FOG/IMU Developer’s Kit includes easy-to-use software that accelerates your IMU and FOG integration, development, and interface efforts.