The 20W X-band BUC is a satellite ground transport terminal that includes a receive rejection filter and performs IF-to-X-band upconversion using an internal reference frequency. It features dustproof, moisture-proof, and waterproof protection, along with self-diagnostic functions such as fan and temperature alarms. The unit provides a total gain of over 50 dB and supports a wide bandwidth of 500 MHz. Its frequency stability is maintained within 0.35 ppm.

- Compact size with built-in drive, position sensor, DC motor and gear box - Better durability & faster speed under similar rated load comparing to 12Lf series thanks to the bigger 17mm diameter DC motor - Position, current and speed control along with position & current feedback - Easy digital extended I/O control through 4 x Expansion I/O ports (No coding) - 27/37/50/87mm(*) stroke option (*): Each 3mm stroke can be added when adjusting the long stroke limit through Total Manager software. Rated load of 17N~70N depending on the lead angle for each stroke (Speed is inversely proportional to the rated load, so the higher the rated load, the slower the speed.) - RS-485 MODBUS-RTU protocol applied (IR open protocol is not provided) - Action feature which enables user’s motion save & run

- Detects fire through heat sources when installed in areas where optical fire detectors are difficult to apply, such as in the presence of contaminants or obstructed visibility - Capable of detecting fire even if the sensing line is severed - Length can be adjusted depending on the equipment applied

A next-generation Advanced Air Mobility (AAM) aircraft currently under development, designed with a separable upper platform and lower mission module structure. The interchangeable lower modules can be configured for passenger transport, cargo delivery, or reconnaissance missions, offering exceptional operational flexibility across various applications. As a large-scale platform, it embodies the future of modular air mobility, enabling rapid mission conversion, efficient maintenance, and cost-effective operation for both urban and regional air mobility sectors.

As a leading manufacturer in the world’s marine engine market, STX Engine provides all services related to design, manufacture, sales, after-sales services, etc., and is responding to diversifying market demands and severe regulations based on its long experience and know-how.

Fast & precise 5-axis exceeds expectations • 15000, 20000 r/min high speed spindle • B-axis/C-axis 0.0001 degree control as standard • Tool change time (C-T-C) 3.8s, 28% faster than previous model • Increased X/Y/Z-axis rapid traverse speed & acc./dec. • Cooling functions as std. on spindle, motor/LM guide/ball screw (X/Y/Z), C-axis table motor • Integrated thermal compensation systems for spindle and structure FURTHER INCREASED MACHINING CAPACITY • Ø630mm dia. 2-axis tilting table, 26% increased compared to previous model • Max. Ø600 x H500mm machining area, 32% increased compared to previous model • Max. 400kg table load capacity with stable table support structure • X/Y/Z axis travel distance 650/520/480mm, up to 20% increased compared to previous model EASY ACCESS, EASIER OPERATION • Easy setup of workpieces with 580mm distance between operator and table center • Easy tool exchange by placing the tool magazine door on the front and applying a tool removal device (Auto Kicking Device) • Improved chip disposal capability with enhanced coolant flood & flushing functions • Grease lubrication system • Compact integrated automation system (AWC)

Features ▪ Xilinx Zynq-7000 Series ARM-Cortex-A9 Core ▪ 10/100/1000 Ethernet Interface ▪ General-Purpose Input/Output ▪ SDLC Interface ▪ RS-232 Interface ▪ VPX 3U Form Factor ▪ Wedge lock, Plug-in Design ▪ Customized Rear I/O Pin Map

Key RADAR in counter-fire warfare to defeat enemy artillery by reversely tracing the trajectory of ballistic missile. Design and Manufacture - Environmental Control Unit - Driving unit - Generator - TR module rack & Antenna Case