The AMT-206-1 composite tail rotor blade is a direct replacement for Bell 206A and 206B series helicopter tail rotor blades. Now fitted with a new style of feathering bearings manufactured by KAMATICS. These bearings provide a longer life expectancy, with a patented lining that provides lighter pedal loads and a higher level of chemical resistance, compared to that of the standard fabric Teflon-lined bearings. The AMT-206-1 tail rotor blade has a non-symmetrical airfoil section and incorporates a swept tip. The T/R Blade is primarily fabricated from uni-directional Graphite (carbon fiber) and Aramid (Kevlar™) continuous fibers suspended in an epoxy matrix and is fitted with a nickel abrasion strip on the leading edge. The abrasion strip is bonded on using a urethane adhesive. The AMT-206-1 composite tail rotor blades have a 30% cost advantage, twice the lifespan, higher strength and thrust, and a substantial noise reduction, making them safer and ideal for helicopter operators flying in noise-sensitive areas like national parks and built-up areas.

The Aerospace & Defense Team's Business Service Providers (BSP) Directory is designed to help U.S. aerospace & defense companies identify professional service providers to assist them in the assessment, completion, and/or financing of an export transaction.

1. The recorded flight and voice data are securely stored on crash-protected memory, both fixed-installed and deployable. 2. This proven FDR with legacy is available for rotary and fixed wings for military but also for civil application like Urban Air Mobility(UAM). 3. It is a All in One recording, Innovation in lightweight solutions,certified by European Airworthiness Certification Authority that secures the aviation safety.

JWGE connector which was derived from the VG95234, was developed for low-voltage/high-current transmission and, when combined, exhibits IP68 water and dust resistance, also exhibiting excellent durability and mechanical performance in a temperature range of 55° to +125°C. These features are applied and utilized in military vehicles and various industrial equipment.

24-7 non-stop operating RADAR for ceaseless aerial surveillance and early trajectory detection. Design and Manufacture - Antenna Housing - Driving Unit

Hydraulic top bracing is an attenuation device installed between the main engine and the hull of the ship to reduce thermal expansion and vibration from the main engine to natural frequencies. The operating principle is an automatic control operating system through in/out and on/off the operating range of the hydraulic top bracing according to the rpm of the main engine. The number of hydraulic cylinders per engine is typically 2, 4, 6 depending on the type of engine, up to 8 are installed if necessary, and 1~2 of control panels are installed.

◾ Drive Motor : Electric motor installed in the Explosive Ordnance Disposal (EOD) Robot to supply power for driving. ◾ Flipper Motor : Electric motor that supplies power for driving the flipper of the Explosive Ordnance Disposal (EOD) Robot.

InterGravity Technologies has developed a 20 Newton-class bipropellant thruster designed for orbital transfer vehicles (OTVs), lunar hoppers, and micro-spacecraft requiring high efficiency, reliability, and reusability. The thruster operates with green propellants (C₂H₆, N₂O), providing both environmental compatibility and storability advantages. Key Features -Thrust Level : 20N -Specific Impulse : > 295s in vacuum