HyperStac RX Series is a Z axis interconnection solution designed for all types of micro-electronics applications requiring reliable and compact packaging solutions. The Hyperstac RX Series meets the needs of the Defence, Avionics and Space electronics applications.

ICONYX™ is a high-performance tactical grade Inertial Measurement Unit (IMU) for guidance and control applications. ICONYX™ is designed to meet the most demanding environmental conditions with extreme accuracy and reliability. Proven Technology Safran proposes an IMU based on Hemispherical Resonator Gyroscope the HRG Crystal™. This technology is combat proven for 15 years and is extremely accurate, reliable, and is capable of navigating in the most contested GNSS denied environments. HRG Crystal™ Embedded Thanks to the HRG Crystal™, ICONYX™ surpasses the highest performances of its category while keeping the best in class SWaP (Size, Weight, and Power) characteristics of the market. High performance in demanding environments ICONYX™ includes 3 hemispherical resonator gyroscopes HRG Crystal ™ and 3 closed loop MEMS (Micro Electro Mechanical Systems) accelerometers in a compact package. Both Safran’s gyroscopes and Safran’s accelerometers are technological breakthrough.

Global Wideband Connectivity for Mission Success Honeywell’s JetWave MCX satellite communications system delivers the world’s most advanced high-speed SATCOM capabilities needed for the most demanding mission profiles. It enables global in-flight broadband data connectivity on nearly any Ka-band network – including Inmarsat’s Global Xpress (GX) network, Wideband Global SATCOM (WGS), and other commercial and military Ka-band networks – making it truly network-agnostic for the most extensive global coverage. Built on proven, high-speed JetWave technology, JetWave MCX utilizes a wider frequency band (29-31 GHz Tx and 19.2-21.2 GHz Rx), offering access to commercial and military Ka-bands globally. And the dual polarity configuration provides increased bandwidth in high-traffic areas while meeting high-data uplink requirements that military and government operators require. JetWave MCX is designed with “future-proofing” in mind, exceeding current connectivity requirements while enabling expanded customer connectivity needs in the future. For the unique requirements of military and government operators, JetWave MCX can enable a wide variety of mission-critical applications, such as en-route mission communications, real-time weather, in-flight video conferencing, large file transfer, in-flight mission planning and briefings, ISR video transmission, and secure communications. We offer specialized data packages for ISR missions, making use of the increased upload speed capabilities. Single-IP address network-switching capabilities enable seamless connectivity for users globally, while access to resilient modem waveforms offers additional security and jam-resistance in hostile environments. JetWave MCX’s high-bandwidth capabilities can transform the aircraft into an “airborne communications node” by receiving data simultaneously from multiple sources – such as UAVs or ground forces – then processing and amalgamating the data for airborne Command and Control or for transmission to ground control. No matter the mission profile, JetWave MCX offers the resiliency, bandwidth, and network-agnostic capabilities needed to enable mission success.

Titanium Grade 1 Strip Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 5 ELI Bars-Sheets and Plates Titanium Ti-6Al-7Nb Bars

Receives vibration signals from an accelerometer installed on the aircraft engine and monitors engine vibration. Processes real-time vibration signals and converts them into IPS AVG units for output. Developed for localization, achieving 50% cost competitiveness compared to equivalent products. - x1 MIL-STD-1553B - x2 UART(RS-422/485) - x2 Accelerometer sensor - Sample rate : Up to 5,000Hz - Size : 220 x 206 x 52 (mm) - Weight : 1.75Kg - Environment : MIL-STD-810G - EMI/EMC : MIL-STD-461G - Power : MIL-STD-704F (28VDC, 10W)

Supports non-destructive inspection of aircraft composite skin structures and is composed of a piezoelectric layer sensor, data acquisition equipment, and damage analysis software. Utilizes piezoelectric sensors to generate Lamb-wave and acquire signals, collecting data to accurately detect and assess composite damage. Visualizes inspection results on display such as damage location, size and index. - POD Accuracy: 1 inch 90% or more - POD Precision : Position error within 30 mm - 64 channels / 230 path reference detection time within 10 minutes - Sensor : Resonance resistance less than 400kΩ - Sensor : MIL-STD-810G - Sensor : RTCA DO-160 Section 23.0 - DAQ : x128 Piezoelectric sensor interface

MPS Microsystems is specialized in manufacturing high-precision, miniature linear bearings. We offer a comprehensive range of exceptionally smooth bearings with bore diameters from Ø 2 mm to Ø 6 mm. The balls of these precision bearings meet ‘Grade 3’, the highest quality defined by the ISO 3290/DIN 5401 standard. Combined with a cage and a high precision casing, they allow rapid positioning while reducing friction and eliminating the stick-slip effect. The standard version of MPS Microsystems linear bearings consists of a stainless steel bushing and balls, and a brass cage. An all-stainless steel version or one with ceramic balls can be made on request.

Hermetic connectors are essential to maintain system integrity in applications where the reliability and performance of electrical connections is critical, such as gas-tight barriers or high-pressures differentials.